722586
12
Zoom out
Zoom in
Previous page
1/144
Next page
12 13
(Original instructions)
© 2017 English
(Original instructions)
© 2017 EnglishEN
Warning - danger!
Only suck in cold ash. See g. 8.
Warning - danger!
Never suck in ash by inserting the tube into it. Never suck
in hot or red hot ash. Never suck in damp or wet ash.
See g. 9.
7.2.2 Hand-operated lter shaker. See fig.7b.
Filter (B1) and lter (B2) can be cleaned with the lter
shaker device.
Operate the lter shaker device several times. See g.7b.
If the dirt is still not effectively detached after shaking
several times, remove lter (B2) and, if necessary, lter
(B1) and proceed as shown. See g.11.
If the dirt cannot be removed, change lter (B2) and, if
necessary, lter (B1).
7.3 Stopping operation (Pauses)
Switch off the appliance. See fig. 6.
7.4 Finishing work
Switch off the appliance. See fig. 6.
Disconnect the plug.
7.5 Empty the tank
For dry dirt and dust: remove the nozzle from the appliance and empty
the tank. See fig 10.
Clean lter (B2) as shown. See fig.11.
8 MAINTENANCE (PAGE 6)
Warning - danger!
All installation and assembly operations must be performed with the appliance
disconnected from the mains power supply.
See page 6.
Always switch the appliance off and disconnect the plug before any servicing
or maintenance work. Repairs and work on electrical systems may only be
carried out by the Service Centre.
Warning - danger!
Never use abrasive detergents, glass detergents or universal detergents!
Never immerse the cover with motor (A10) in water. Clean the appliance and
plastic accessories with a standard synthetic material detergent. Rinse the
tank and accessories with water if necessary and dry them before reuse.
8.1. Cleaning the fire retardant filter. See fig.11.
Open the ash cleaner by releasing the catches (A6). Shake the cover
(A10) up and down so that the excess ash on the lter cover falls into
the tank, turn the cleaner's cover (A10) upside down and remove the
lter (B2).
Shake carefully and reassemble as shown.
Warning: the re retardant lter must not be washed.
8.1.1 Cleaning the cartridge filter. See fig 11.
Open the ash vacuum cleaner by releasing the catches
(A6). Turn the cover of the appliance (A10) upside down
and remove the lter (B1).
Rinse carefully under running water and leave to dry. Do not
reassemble until dry.
9 END-OF-SEASON STORAGE (PAGE 6)
Warning - danger!
All installation and assembly operations must be performed with the appliance
disconnected from the mains power supply.
After finishing work, clean the appliance and then put it and the accessories
away as shown. See fig 12.
Store the appliance in a dry place.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SXVC20TPE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SXVC20TPE in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info