720718
9
Zoom out
Zoom in
Previous page
1/13
Next page
9
ENGLISH
(Original instructions)
Emptying the shavings collection bag
The shavings collection bag should be emptied regularly
while using it to prevent blocking.
Unzip the bag and empty it before continuing.
Use
Warning! Let the tool work at its own pace. Do not overload.
Adjust the depth of cut.
If necessary, fit and adjust the parallel fence.
Switching on and off
Switching on
Keep the lock-off button (2) depressed and press the
on/off switch (1).
Release the lock-off button.
Switching off
Release the on/off switch.
Planing
Hold the tool with the nose piece of the shoe resting on
top of the workpiece surface.
Switch the tool on.
Move the tool steadily forward to perform the cutting
stroke.
Switch the tool off after the stroke has been completed.
Rebating (fig. F)
Fit and adjust the parallel fence.
Proceed as for planing.
Chamfering edges (fig. G)
The V-groove in the nose piece of the shoe enables you to
chamfer edges at 45°, 30° and 15° angles.
Hold the tool at an angle with the desired groove (20)
around the edge of the workpiece and perform the
cutting stroke.
Parking rest (fig. H)
Your planer is equipped with a parking rest (21) that
automatically lowers into place when the tool is lifted from
the work surface. When planing, the parking foot raises as
the tool is pushed forward. When the parking foot is lowered,
the planer can set on the work surface without the blade
touching.
Hints for optimum use
Move the tool along the grain of the wood.
If the grain is cross or curly, or if the workpiece material
is a hard type of wood, adjust the depth of cut to take
only a very thin shaving at each pass and take several
passes to achieve the desired result.
To keep the tool in a straight line, press down the front of
the tool at the start, and press down the back of the tool
at the end of the cutting stroke.
Accessories
The performance of your tool depends on the accessory
used. STANLEY and Piranha accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you
will get the very best from your tool.
The following types of cutting blades can be obtained from
your local retailer:
- Tungsten carbide tipped reversible cutting
blades (part no. X35007, supplied per pair)
- High-speed steel reversible cutting blades
(part no. X24192-XJ11, supplied per pair)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STPP7502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STPP7502 in the language / languages: English as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info