622244

Stanley STHT77341 - Cross 90 Manual

11
Zoom out
Zoom in
Previous page
1/210
Next page
STHT77341
11
Keypad, Modes, and LED
Keypad/ Switch
Power OFF/ Pendulum Lock ON
Pendulum lock off /Self-leveling On
Pendulum lock on /Manual mode/Self-leveling
Off
• Move
to the locked or unlocked position to turn the
laser tool ON.
• To turn the laser tool OFF, move
to the centre
position .
•
•
Side Vertical Beam ON / OFF
Press
to turn the side vertical beam ON./OFF
Modes
Laser Beam Available Modes
• Cross Line ON (D
1
): Horizontal Beam Line and
Vertical Beam Line ON
• All beams ON (D
2
): Horizontal Beam Line,
Vertical Beam Line and Side Beam Line ON
• All beams OFF
Self-Leveling (See figures
C
and
D
)
• The pendulum lock on the laser tool needs to be
switched to the unlocked position to enable self-leveling.
Manual Mode (See figures
C
and
D
)
• The laser tool can be used with the pendulum lock in the
locked position when it is required to position the laser
tool at various angles to project non-level straight lines.
LED /Out-of-Level Indicator Operation (See figure
A
# 5 )
LED OFF
Power is OFF/ Pendulum Lock is ON
Power is ON, pendulum lock is OFF
and laser
unit is within self-leveling range.
Solid RED
• Power is ON, pendulum lock is OFF, and
laser unit is out of level.
• or
• Power is ON , pendulum lock is ON/ Self-
Leveling is OFF.
QuickLink ™ Bracket Overview
Figure F -QuickLink ™ Bracket
10. T-nut to mate with slots on Laser Unit.
11. Jaw Tightening Knob.
12. Bracket Tightening Knob .
13. Hang holes for screw mounting. (34mm apart)
14. 1/4-20” threaded mount.
15. Adjustable Jaw
Bracket Applications
• The QuickLink bracket can be mounted in various
positions by clamping the jaws to round or flat objects
such as a tripod pole, door or bench and tightening the
knobs. ( See figure
F
: #11 & #12)
• The QuickLink bracket can be mounted on a vertical
surface using the hang holes provided. (See figure
F
#13)
•
• The QuickLink bracket can be attached to the bottom
of the laser unit using the 1/4-20” threaded mount
(Figure
F
#14 and figure
A
#1) or the t-nut and
slot connection.
Cross90 GB_STHT77341.indd 11 01/07/2013 09:50
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STHT77341 - Cross 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STHT77341 - Cross 90 in the language / languages: All languages as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info