622243

Stanley STHT77340 - Cubix Manual

12
Zoom out
Zoom in
Previous page
1/208
Next page
12
STHT77340
Accuracy Check and Calibration
NOTE:
• The laser tools are sealed and calibrated at the factory to
the accuracies specified.
• It is recommended to perform a calibration check prior to
its first use and then periodically during future use.
• The laser tool should be checked regularly to ensure its
accuracies, especially for precise layouts.
• When performing the accuracy checks, use the largest
area / distance possible, closest to the operating distance.
The greater the area / distance, the easier to measure the
accuracy of the laser.
• The lock must be in the unlocked position to allow the laser
tool to self-level before checking the accuracy.
Level Beam Accuracy (See figure
H
)
•
H
1
Place laser tool as shown with laser ON. Mark point
P
1
at cross.
•
H
2
Rotate laser tool 180° and mark point P
2
at cross.
•
H
3
Move laser tool close to wall and mark point P
3
at
cross.
•
H
4
Rotate laser tool 180° and mark point P
4
at cross.
•
H
5
Measure the vertical distance between P
1
and P
3
to get
D
3
and the vertical distance between P
2
and P
4
to get D
4
.
• Calculate the maximum offset distance and compare to the
difference of D
3
and D
4
as shown in the equation.
• If the sum is not less than or equal to the calculated
maximum offset distance the tool must be returned
to your Stanley Distributor for calibration.
Maximum Offset Distance:
= 0,8
mm
m
x (D
1
m - (2 x D
2
m))
Maximum
= 0,0026
in
ft
x (D
1
ft - (2 x D
2
ft))
Compare : (See figure
H
5
)
D
3
- D
4
≤ ± Maximum
Example:
• D
1
= 10 m, D
2
= 0,5 m
• D
3
= 0,5 mm
• D
4
= - 1,0 mm
• 0,8
mm
m
x (10 m - (2 x 0,5 m) = 7.2 mm
(maximum offset distance)
• (0,5 mm) - (- 1,0 mm) = 1,5 mm
• 1,5 mm ≤ 7.2 mm
(TRUE, tool is within calibration)
Cubix_GB_STHT77340.indd 12 01/07/2013 15:38
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STHT77340 - Cubix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STHT77340 - Cubix in the language / languages: All languages as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info