720833
3
Zoom out
Zoom in
Previous page
1/96
Next page
3
GB
Attach Camera Wand:
Gently push the camera wand connector onto
the connector of the display body. Turn the
threaded ferrule in a clockwise direction until
rmly seated, DO NOT over-tighten the camera
wand.
NOTE: To remove the wand turn the ferrule in
a counter-clockwise direction, this direction is
marked directly on the ferrule.
Attach Accessories:
All accessories attach to the camera end of the
wand in the same manner:
1. Hook the small end of the attachment into
the hole in the camera body.
2. Firmly slide retainer ring over attachment/
camera body.
Video Output:
Insert 3 mm jack on the video adapter cable
into the video output socket on the side of the
display body. The other end of the cable can
now be connected to any compatible RCA style
video input device.
Operation:
1. Press and hold the power button for
approximately 3 seconds to turn the camera
on; the power LED will illuminate and the
color LCD display will become viewable.
2. When in use, the camera wand should
be easily maneuverable into the desired
position. NOTE: Do not apply excessive
force to position the camera wand. If
maneuvering becomes difcult the wand
may be hitting an obstruction and should be
repositioned to avoid damage to the unit and/
or its surroundings.
3. During use, the rotate/mirror image button
(ref g #1) can be used to better align the
camera view to the user.
4. During use, the brightness button
(ref g #1) can be used to adjust the
camera’s illumination LEDs to 8 different
levels for optimal viewing in less than ideal
lighting conditions.
5. During use, the contrast button (ref
g #1) can be used to adjust the LCD
display’s contrast to 8 different levels for
optimal viewing.
SPECIFICATIONS:
Screen Size 2.31” TFT LCD
Effective Pixels 640x480
Contrast Levels 8
Brightness Levels 8
Battery Type 4 x AA (1.5V) Batteries
Battery Life 6 Hours Max
Video System PAL/NTSC
Output Signal Impedence 75 ohm
Output Signal Level 0.9-1.3Vp-p
Water Resistance IP67 for camera wand
ONLY
Weight (w/Batteries) Approximately 14.5 oz
(407g)
Storage Temp. Range -20°F – 150°F
(-29°C – 66°C)
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STHT0-77363 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STHT0-77363 in the language / languages: All languages as an attachment in your email.

The manual is 16,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info