720271
7
Zoom out
Zoom in
Previous page
1/85
Next page
© 2018, Obelis S.A. Vestigingsadres: Bd. Général Wahis, 53
1030 Brussels, Belgium
LAAT DE KACHEL NOOIT ONBEWAAKT ACHTER MET DE STEKKER IN HET STOPCONTACT
GIDS VOOR PROBLEEMOPLOSSING
Probleem Mogelijke oorzaak Oplossing
Kachel slaat aan maar hoofd-PCB
schakelt kachel na enige tijd uit.
Lampje flikkert en led-display geeft
‘E1’ weer.
1. Pompdruk verkeerd.
2. Inlaat, uitlaat of pluisfilter vuil.
3. Brandstoffilter vuil.
4. Sproeier vuil.
5. Fotocellens vuil.
6. Fotocel verkeerd geïnstalleerd.
7. Fotocel defect.
8. Elektrische verbinding tussen
hoofd-PCB en fotocel verkeerd.
1. Pas pompdruk aan.
2. Reinig/vervang luchtfilter.
3. Reinig/vervang brandstoffilter.
4. Reinig/vervang sproeier.
5. Reinig/vervang fotocel.
6. Verstel fotocel.
7. Vervang fotocel.
8. Controleer elektrische aansluitingen
(zie Bedradingsschema's op pagina 4).
Kachel slaat niet aan of motor draait
maar eventjes. Lampje flikkert en
led-display geeft ‘E1’ weer.
1. Geen kerosine in brandstoftank
2. Pompdruk verkeerd
3. Bougie gecorrodeerd of
elektrodenafstand verkeerd.
4. Brandstoffilter vuil.
5. Sproeier vuil.
6. Vocht in brandstof/brandstoftank.
7. Verkeerde elektrische verbinding
tussen trafo en printplaat.
8. Ontstekingsdraad niet verbonden met
bougie.
9. Ontsteking defect.
1. Vul tank met verse kerosine.
2. Pas pompdruk aan.
3. Reinig/vervang bougie.
4. Reinig/vervang brandstoffilter.
5. Reinig/vervang sproeier.
6. Spoel brandstoftank met schone,
verse kerosine.
7. Inspecteer alle elektrische
verbindingen (zie Bedradingsschema's
op pagina 4).
8. Sluit ontstekingsdraad aan op bougie.
9. Vervang ontsteking.
Ventilator werkt niet als stekker van
kachel in stopcontact is gestoken en
aan/uit-schakelaar op stand ‘AAN’
staat. Lampje flikkert of brandt en
led-display geeft ‘E1’ of ‘E2’ weer.
1. Thermostaat te laag gezet (geldt niet
voor ST-45-KFA-E).
2. Elektrische verbinding tussen
hoofd-PCB en thermostaat verbroken.
1. Draai thermostaat naar een hogere
stand.
2. Inspecteer alle elektrische verbindingen
(zie Bedradingsschema's op pagina 4).
Lampje flikkert en led-display geeft
‘E3’ weer.
1. Thermostaatschakelaar defect. 1. Vervang thermostaatschakelaar.
Slechte verbranding en/of veel roet.
1. Inlaat, uitlaat of pluisfilter vuil.
2. Brandstoffilter vuil.
3. Brandstofkwaliteit slecht.
4. Druk te hoog of te laag.
1. Reinig/vervang luchtfilter.
2. Reinig/vervang brandstoffilter.
3. Zorg dat brandstof niet vuil of oud is.
4. Gebruik juiste druk.
Kachel gaat niet aan en lampje
brandt niet.
1. Temperatuurlimietsensor oververhit.
2. Geen stroom.
3. Zekering doorgesmolten.
4. Verkeerde elektrische verbinding
tussen temperatuurlimietsensor
en printplaat.
1. Zet aan/uit-schakelaar op ‘UIT’ en laat
kachel 10 minuten afkoelen. Zet aan/
uit-schakelaar weer op 'AAN'.
2. Inspecteer snoer en verlengsnoer op
correcte aansluiting. Test voeding.
3. Controleer/vervang zekering.
4. Inspecteer alle elektrische verbindingen
(zie Bedradingsschema's op pagina 4).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley ST-70T-KFA-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley ST-70T-KFA-E in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 19,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info