Manual Stanley ST-25-400-E (page 93 of 101) (English, German, Dutch, French, Polish, Portuguese, Spanish)

720232

Zoom out

Zoom in

1/101

Bd. Général Wahis, 53 1030 Brussels, Belgium

NEVER LEAVE HEATER UNATTENDED WHILE

CONNECTED TO A POWER SOURCE

Operation

1. Position the fan heater so that it stands

upright on a rm, level surface and at

a safe distance from wet environments

and ammable objects.

2. Connect the fan heater to the proper

electrical power.

3. Set the thermostat dial to “+”.

4. The fan heater will switch on when the

function selector dial is set to one of the

power settings.

5. Once the room reaches the desired

temperature, turn the thermostat dial

back until heating element turns off.

6. Before you switch off the heater, please

turn the thermostat to “-” and turn

the switch to the fan position. Let the

appliance cool down for two minutes,

and only then turn off the heater and

pull out the plug from the power supply.

Automatic Overheat Safety Control

- This heater is equipped with safety

internal heat limiting thermostat and

overheat protection circuit. When a

potential overheat temperature is

reached, the system will automatically

shut the heater off.

Thermostat Instructions

- At rst, set the thermostat to “+” and let

the heater operate with full power input.

When the room temperature reaches

the required value, turn the thermostat

to the left until it switches off.

- The thermostat will then switch on and

off automatically to control the room

temperature according to the preset

value and keep the room temperature

constant.

- When using the heater for the rst time,

you may notice a slight emission of

smoke. This is quite normal and it stops

after a short time. The heating element

is made of steel and was coated with a

layer of protective oil during production.

The smoke is caused by the leftover oil

as it is heated.

Cleaning and Maintenance

- Before cleaning the appliance,

disconnect it from the outlet and let it

cool down.

- The enclosure is easy to get dirty. Wipe

it often with a soft sponge. For very

dirty parts, wipe with a sponge dipped

in < 50°C water and mild detergent,

then dry the heater enclosure with a

clean cloth. Be careful not to let the

water enter the inside of the appliance

- In order to protect the enclosure, don’t

splash water onto the heater, and never

use a solvent like gasoline, isoamyl

acetate, toluene, etc. to clean the

heater.

- When you store the heater, let it cool

down first and, keep it dry. Then cover

it with a plastic bag, put it in the packing

box and store it in a dry, ventilated

place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley ST-25-400-E in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 7,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley ST-25-400-E Manual

Product: