720585
9
Zoom out
Zoom in
Previous page
1/44
Next page
9
(Original Instructions) ENGLISH
VIBRATION AND NOISE
The declared vibration and noise emission values stated in
the technical data and the declaration of conformity have
been measured in accordance with a standard test method
provided by EN 62841 and may be used for comparing one
tool with another. The declared vibration and noise emission
value may also be used in a preliminary assessment of
exposure.
WARNING! The vibration and noise emission
value during actual use of the power tool can
differ from the declared value depending on the
ways in which the tool is used. The vibration and
noise level may increase above the level stated.
When assessing vibration and noise exposure to determine
safety measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation
of vibration and noise exposure should consider, the actual
conditions of use and the way the tool is used, including
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.
EC declaration of conformity
MACHINERY DIRECTIVE
SS30 - Random orbital sander
STANLEY declares that these products described under
“technical data” are in compliance with: 2006/42/EC,
EN 62841-1: 2015, EN 62841-2-4: 2014.
These products alsoV comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
STANLEY at the following address or refer to the back of
the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
R.Laverick
Engineering Manager
STANLEY , Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
06.2018
TWO YEAR WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date
of purchase, STANLEY guarantees to replace all defective
parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
The product has not been misused and has been used
in accordance with the instruction manual;
The product has been subject to fair wear and tear;
Repairs have not been attempted by unauthorized
persons;
Proof of purchase is produced;
The STANLEY product is returned complete with all
original components;
The product hasn’t been used for hire purposes.
If you wish to make a claim, contact your seller or check
the location of your nearest authorised STANLEY repair
agent in the STANLEY catalogue or contact your local
STANLEY office at the address indicated in this manual. A
list of authorised STANLEY repair agents and full details
of our after sales service is available on the internet at:
www.2helpU.com
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SS30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SS30 in the language / languages: English, French, Turkish as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info