720732
7
Zoom out
Zoom in
Previous page
1/44
Next page
7
(Original Instructions) ENGLISH
Cable length (m)
7.5 15 25 30 45 60
Voltage Amperes Cable rated current (Ampere)
110-127 0 - 2.0 6 6 6 6 6 10
2.1 - 3.4 6 6 6 6 15 15
3.5 - 5.0 6 6 10 15 20 20
5.1 - 7.0 10 10 15 20 20 25
7.1 - 12.0 15 15 20 25 25 -
12.1 - 20.0 20 20 25 - - -
220-240 0 - 2.0 6 6 6 6 6 6
2.1 - 3.4 6 6 6 6 6 6
3.5 - 5.0 6 6 6 6 10 15
5.1 - 7.0 10 10 10 10 15 15
7.1 - 12.0 15 15 15 15 20 20
12.1 - 20.0 20 20 20 20 25 -
LABELS ON TOOL
The label on your tool may include the following symbols:
must read the instruction manual before use.
WARNING! To reduce the risk of injury, the
user
Wear safety glasses or goggles.
Wear ear protection.
Wear a dust mask.
V Volts
Direct Current
A Amperes n
0
No-Load Speed
Hz Hertz
Class II
Construction
W Watts
Earthing
Terminal
min minutes
Safety Alert
Symbol
Alternating
Current
/min. Revolutions or
Reciprocation
per minute
Position of date code
The Date Code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
PACKAGE CONTAINS
1 1/3 Sander
1 Instruction manual
1 Warranty card
1 Service center list
1 Sanding paper
Check for damage to the tool, parts or accessories which
may have occurred during transport.
Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (FIG. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1. On/off switch
2. Lock-on button
3. Sanding base
4. Paper clamp lever
ASSEMBLY
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from
power source before making any adjustments or
removing/installing attachments or accessories.
Before reconnecting the tool, depress and
release the trigger switch to ensure that the tool
is off. An accidental start-up can cause injury.
Fitting sanding paper (Figure. A,B)
WARNING! Never use the tool without a sanding
paper or accessory in place.
Soften the sanding paper by rubbing its non-abrasive
side over the edge of a worktop.
Release the sanding paper clamp levers (4).
Place the paper onto the sanding base (3).
Insert the edge of the sanding paper into the front paper
clamp as shown.
Press the front paper clamp lever (4) downwards.
While keeping a slight tension on the paper, insert the
rear edge of the paper into the rear paper clamp.
Press the rear paper clamp lever (4) downwards.
USE
WARNING:Let the tool work at its own pace. Do
not overload.
Switching on and off
To switch the tool on, press the on/off switch (1).
For continuous operation, press the lock-on button (2)
and release the on/off switch.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SS28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SS28 in the language / languages: English, French, Turkish as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info