720584
7
Zoom out
Zoom in
Previous page
1/44
Next page
7
ENGLISH (Original Instructions)
Cable length (m)
7.5 15 25 30 45 60
Voltage Amperes Cable rated current (Ampere)
110-127 0 - 2.0 6 6 6 6 6 10
2.1 - 3.4 6 6 6 6 15 15
3.5 - 5.0 6 6 10 15 20 20
5.1 - 7.0 10 10 15 20 20 25
7.1 - 12.0 15 15 20 25 25 -
12.1 - 20.0 20 20 25 - - -
220-240 0 - 2.0 6 6 6 6 6 6
2.1 - 3.4 6 6 6 6 6 6
3.5 - 5.0 6 6 6 6 10 15
5.1 - 7.0 10 10 10 10 15 15
7.1 - 12.0 15 15 15 15 20 20
12.1 - 20.0 20 20 20 20 25 -
LABELS ON TOOL
The label on your tool may include the following symbols:
must read the instruction manual before use.
WARNING! To reduce the risk of injury, the
user
Wear safety glasses or goggles.
Wear ear protection.
Wear a dust mask.
V Volts
Direct Current
A Amperes n
0
No-Load Speed
Hz Hertz
Class II
Construction
W Watts
Earthing
Terminal
min minutes
Safety Alert
Symbol
Alternating
Current
/min. Revolutions or
Reciprocation
per minute
Position of date code
The Date Code, which also includes the year of
manufacture, is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
THE PACKAGE CONTAINS
1 1/4 Sander
1 Punch plate
1 Dust bag
1 Instruction manual
1 Warranty card
1 Service center list
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (FIG. A)
WARNING: Never modify the power tool or
any part of it. Damage or personal injury could
result.
1. On/off switch
2. Dust bag
3. Sanding base
4. Paper clamp lever
5. Punch plate
6. Dust bag collar
7. Dust extraction outlet
ASSEMBLY AND ADJUSTMENT
WARNING: To reduce the risk of serious
personal injury, turn tool off and disconnect
tool from power source before making any
adjustments or removing/installing attachments
or accessories. Before reconnecting the tool,
depress and release the trigger switch to ensure
that the tool is off. An accidental start-up can
cause injury.
Dust extraction (Fig. B)
WARNING: Since woodworking with a sander
produces dust, always install a dust bag
designed in compliance with the applicable
directives regarding dust emission.
WARNING: Do not use a dust bag or vacuum
extractor without proper spark protection when
sanding metal.
Your sander has a dust extraction methods: a built-in
outlet (7) which allows either the supplied dust bag (2) or a
shop vacuum system to be connected.
To attach the dust bag
While holding the sander, fit the dust bag collar(6) to the
outlet (7) as shown in Figure C.
Turn the collar (6) anticlockwise to lock the dust bag (2)
in place.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SS24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SS24 in the language / languages: English, French, Turkish as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stanley SS24

Stanley SS24 User Manual - Portuguese, Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info