720580
15
Zoom out
Zoom in
Previous page
1/233
Next page
15
1. Battery
2. Drift Cutters
3. Chute Clean-Out Tool
4. Shear Pins
5. Auger
6. Auger Gearcase
7. Scraper Blade
8. Drive Clutch Lever
9. Auger Clutch Lever
10. Headlight
11. Speed Shift Lever
12. Chute Crank
13. Chute Deflector Handle
14. Chute Deflector
15. Belt Cover
16. Discharge Chute
17. Skid Shoes
18. Fuel Filler Cap
19. Primer
20. Choke
21. Fuel Shutoff Valve
22. Recoil Starter
23. Electric Start Button
24. Power Cord Plug
25. Electric Starter
26. Engine Oil Fill Cap w/ Dipstick
27. Throttle Lever
28. Safety Ignition Switch
29. ON/OFF Switch
Speed Shift Lever
The speed shift lever has 8 positions: 6 forward
speeds and 2 reverse. To change speeds, move
the speed shift lever to the desired position.
The lever locks in a notch at each speed selection.
Always release the drive clutch lever
before changing speeds. Failure to
do so will result in damage to the
snow thrower.
Slower speeds are for heavier snow and faster
speeds are for light snow and transporting the
snow thrower. It is recommended that you use
a slower speed until you are familiar with the
operation of the snow thrower.
If the engine slows down under a
load or the wheels slip, shift the
machine into a lower gear.
If the front of the machine rides up,
shift the machine into a lower gear.
If the front continues to ride up, lift
up on the handles.
Discharge Chute Crank Lever
Rotate the discharge crank lever
clockwise to move the discharge
chute to the left; counterclockwise
to move the chute to the right.
Chute Deflector Handle
Move the deflector handle forward to move
the snow stream down; move it rearward to
move the snow stream up.
Drive Clutch Lever
Squeeze the clutch lever against
the handgrip to engage the wheel
drive. Release to disengage.
Always release the drive clutch lever
before changing speeds. Failure to
do so will result in damage to the
snow thrower.
G
B
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SPT-270-720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SPT-270-720 in the language / languages: English, German, French, Italian, Finnish as an attachment in your email.

The manual is 23,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info