622242
14
Zoom out
Zoom in
Previous page
1/160
Next page
14
77137
Vertical Beam Accuracy
(See fi gure
L
)
L
1
Measure the height of a reference point to get distance
D
1
. Place laser tool as shown with laser ON. Aim vertical
beam towards reference point. Mark points P
1
, P
2
, and
P
3
as shown.
L
2
Move laser tool to opposite side of reference point and
align the same vertical beam with P
2
and P
3
.
L
3
Measure the horizontal distances between P
1
and the
vertical beam from the 2nd location.
Calculate the maximum offset distance and compare to D
2
.
• If D
2
is not less than or equal to the calculated
maximum offset distance the tool must be returned to
your Stanley Distributor for calibration.
Maximum Offset Distance:
= 0,8
mm
m
x D
1
m
Maximum
= 0,0096
in
ft
x D
1
ft
Compare: (See fi gure
L
3
)
D
2
≤ Maximum
Example:
• D
1
= 3 m, D
2
= 1,0 mm
• 0,8
mm
m
x 3 m = 2,4 mm
(maximum offset distance)
1,0 mm ≤ 2,4 mm
(TRUE, tool is within calibration)
Horizontal Beam Accuracy
(Without Vertical Beam) - (See fi gure
K
)
K
1
Place laser tool as shown with laser ON. Roughly aim
the laser tool towards the fi rst corner or a set reference
point. Measure out half of the distance D
1
and mark
point P
1
.
K
2
Rotate and roughly aim laser tool towards point P
1
.
Mark point P
2
so that it is vertically in line with point P
1
.
K
3
Rotate laser tool and roughly aim towards the second
corner or set reference point. Mark point P
3
so that it is
vertically in line with points P
1
and P
2
.
K
4
Measure the vertical distance D
2
between the highest
and lowest point.
Follow same calculations / example when accuracy was
checked with vertical beam.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SLL360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SLL360 in the language / languages: All languages as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info