622242
11
Zoom out
Zoom in
Previous page
1/160
Next page
11
77137
Applications
Plumb
Using the vertical laser beam, establish a vertical reference
plane.
Position the desired object(s) until they are aligned with the
vertical reference plane to ensure object(s) are plumb.
Level
Using the horizontal laser beam, establish a horizontal
reference plane.
Position the desired object(s) until they are aligned with the
horizontal reference plane to ensure object(s) are level.
Square
Using the vertical and horizontal laser beams, establish a
point where the 2 beams cross.
Position the desired object(s) until they are aligned with
both the vertical and horizontal laser beams to ensure
object(s) are square.
Manual Mode (See Figures
C
and
F
)
Disables self-levelling function and allows laser unit to
project laser beam in any orientation.
Keypad, Modes, and LED
Keypads (See fi gure
D
)
Power ON / OFF / Mode Key
Modes (See fi gure
E
)
Available Modes
• Horizontal Line (Front)
All Horizontal Lines (360° Coverage)
All Horizontal and Vertical Lines
Only Vertical Line
All beams OFF
LEDs (See fi gure
D
)
Power LED - Solid GREEN
Power is ON
Power LED - Blinking RED
• Low Battery
Power LED - Solid RED
Replace with New / Recharged Batteries
Lock LED - Solid RED
Pendulum lock is ON
Self-Levelling is OFF
Lock LED - Blinking RED
Out of Compensation Range
Batteries and Power
Battery Installation / Removal
(See fi gure
B
)
Laser Tool
Turn laser tool to battery door and open.
Install / Remove batteries. Orient batteries correctly
when placing into battery compartment.
Close battery door. Be sure that the door has been
closed securely.
WARNING:
Pay close attention to the battery holder’s (+)
and (-) markings for proper battery insertion.
Batteries must be of same type and capacity. Do
not use a combination of batteries with different
capacities remaining.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SLL360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SLL360 in the language / languages: All languages as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info