720786
7
Zoom out
Zoom in
Previous page
1/52
Next page
(Original instructions) ENGLISH
7
Impairment of hearing
Risk of personal injury due flying particles.
Risk of burns due to accessories becoming hot during
operation.
Risk of personal injury due to prolonged use.
Risk of dust from hazardous substances.
LABELS ON TOOL
In addition to the pictographs used in this manual, the labels
on the tool show the following pictographs:
Read instruction manual before use.
Wear safety glasses.
Wear ear protection.
Date Code Position (Fig. B)
The Date Code (13), which also includes the year of
manufacture, is printed into the housing.
Example:
2017 XX XX
Year of Manufacture Package Contents
THE PACKAGE CONTAINS
1 Jigsaw
1 Blade
1 Instruction manual
1 Wrench
1 Warranty card
1 Service center list
Check for damage to the tool, parts or accessories which
may have occurred during transport.
Take the time to thoroughly read and understand this
manual prior to operation.
Description (Fig. A to J)
WARNING: Never modify the power tool or any part
of it. Damage or personal injury could result.
1. Trigger switch
2. Lock-on button
3. Speed controller
4. Dust cover
5. Blade clamp actuator
6. Blade clamp
7. Saw blade
8. Pendulum Stroke selector
9. Shoe plate
10. Dust extraction outlet
11. Wrench
12. Screw-blade clamp
13. date code
14. Vacuum nozzle (optional)
15. Screw-shoe plate
16. Cutting line
17. Rip fence (optional)
18. Screw (optional)
19. Clamp bar (optional)
ELECTRICAL SAFETY
Only one voltage is applicable to this tool. Be sure to check
that the power supply corresponds to the voltage on the rating
plate.
Your Stanley tool is equipped with double insulation,
hence, it does not require to be earthed
When the power cord is damaged, have it sent to a STANLEY
service center for replacement to specially prepared cables.
USING AN EXTENSION CABLE
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm2; the
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
ASSEMBLY AND ADJUSTMENT
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or
removing/installing attachments or accessories.
Before reconnecting the tool, depress and release
the trigger switch to ensure that the tool is off. An
accidental start-up can cause injury.
Fitting the saw blade:
(SJ60) (Fig.A-1)
Lift dust cover (4).
Hold the saw blade (7) as shown, with the teeth facing
forward.
Push the blade clamp actuator (5) away from the shoe
plate (9).
Insert the shank of the saw blade into the blade clamp (6)
as far as it will go.
Release the blade clamp actuator (5).
Turn down dust cover (4).
(SJ45) (Fig. A-2)
Loosen (do not remove) the two screws-blade clamp. (12).
Hold the saw blade (7) with the teeth facing forward.
Insert the shank of the saw blade (7) into the blade clamp
(6) as far as it will go.
Slightly tighten the two screws-blade clamp (12)
alternately to position the blade, then fully tighten the two
screws-blade clamp (12).
WARNING: 1.Always clean out all chips or foreign
matter adhering to blade and/or blade holder.
Failure to do so may cause insufficient tightening of
the blade, resulting in a serious personal injury.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SJ60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SJ60 in the language / languages: English, French, Turkish as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info