720570
14
Zoom out
Zoom in
Previous page
1/185
Next page
14
If you are unable to correct a fault yourself, please contact our technical support directly. Please note
that improperly conducted repairs will void your rights under warranty and may cause you additional
expenses.
Contact service partner.
Fault/malfunction Cause Remedy
Motor will not start.
Is the tank empty? Filling with fuel
Is ignition switch set to "STOP"?Set ignition switch to "ON".
Ignition cable plug loose?
the spark plug.
Ignition cable plug dirty? Clean the plug.
Is there excess fuel inside the
combustion chamber?
Push choke lever to
,
start the motor a few times.
If the motor will not
start: remove the spark
plug and dry the electrode.
Spark plug dirty? Clean the spark plug
Is the distance between the
electrodes of the spark plug
too large?
Set the gap to 0.6 to
0.7 mm.
Wrong fuel or mixture?
with the correct mixture.
Spark plug defective? Cleaning/replacing
the spark plug
Cutting equipment runs while
motor is idling.
Wrong setting for idling? Contact service partner.
Cutting equipment continues
to run after throttle has been
released.
Clutch set incorrectly?
Motor will not reach its maximum
speed.
Spark plug dirty? Cleaning/replacing the spark
plug
Is the electrode separation of
the spark plug too large?
Set the gap to 0.6 to
0.7 mm.
Wrong fuel?
with the correct fuel.
G
B
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SHT-26-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SHT-26-55 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info