Manual Stanley SGC-13000N (page 15 of 92) (English, German, Danish, Polish, Swedish, Norwegian, Finnish)

720566

Zoom out

Zoom in

1/92

2. Remove the belt guard and V-belt.

3. Remove the bolts that hold the deck to the

housing.

4. Lift entire deck with engine from housing.

5. Remove pipe plug from top of exciter

housing. Tilt housing upside down so oil

drains from exciter. Examine oil for metal

chips as a precaution to future problems.

6. Return plate housing to the upright

position.

7. Fill the exciter housing with exciter oil.

Do not overfill - overfilling can

result in excessive temperatures in

the exciter.

8. Apply pipe sealant to pipe plug and

reinstall into top of exciter housing.

9. Reinstall deck, V-belt(s) and belt guard.

STORAGE

If the plate compactor will not be used for

a period longer than 30 days, following the

steps below to prepare your unit for storage.

1. Drain the fuel tank completely. Stored fuel

containing ethanol or MTBE can start to go

stale in 30 days. Stale fuel has high gum

content and can clog the carburetor and

restrict fuel flow.

2. Start the engine and allow it to run until

it stops. This ensures no fuel is left in the

carburetor. Run the engine until it stops.

This helps prevent deposits from forming

inside the carburetor and possible engine

damage.

3. While the engine is still warm, drain the oil

from the engine. Refill with fresh oil of the

grade recommended in the Engine Manual.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SGC-13000N in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SGC-13000N Manual

Product: