720562

Stanley SFMCSTB963 Manual

13
Zoom out
Zoom in
Previous page
1/136
Next page
11
ENGLISH
subject to variation based on product components, temperature
and end-userapplication.
Assembling the Guard (Fig.D, E)
WARNING: Never remove the guard. Damage
or personal injury couldresult.
WARNING: NEVER OPERATE APPLIANCE
WITHOUT GUARD FIRMLY IN PLACE. The guard must
always be properly attached on the appliance to protect
theuser.
1. Assemble the guard
8
to the motor housing
5
.
2. Using a crosshead screwdriver, insert the 4 guard screws and
tightensecurely.
An extended coverage guard is available (sold separately) for
extra coverage if desired. Use STANLEYFATMAX replacement
guard.
Assembling the Pole (Fig.C–E)
1. Do not remove the zip tie until the pole isassembled.
2. Ensure that the sleeve
14
on the lower trimmer
pole
6
is fully extended.
NOTE: To adjust the sleeve, release the sleeve latch
15
and
move the sleeve intoposition.
3. Lock the sleeve latch.
4. With the sleeve latch closed, slide the upper trimmer pole
into the sleeve lower trimmer pole. The latching button
17
will click into position when it engages the latchhole.
5. Tighten the top screw
18
with a crossheadscrewdriver.
Attaching the Auxiliary Handle (Fig.F)
1. Place the auxiliary handle
4
onto the top of the upper
trimmer pole
6
as shown in FigureF.
2. Slide the bracket
31
of the auxiliary handle onto the
bottom of thehandle.
3. Thread the handle bolts
32
through the handle and into
the bracket fromabove.
4. Tighten the handle bolts. Ensure the handle is securely
attached by closing the handle clamp
19
.
5. To adjust the position of the auxiliary handle, open the
handle clamp and slide the handle up and down the pole
until it is in the desired location. Close the clamp to lock the
handle inplace.
Height Adjustment (Fig.E)
CAUTION: Adjust the length of the trimmer to
obtain proper workingpositions.
1. The overall height of the trimmer can be adjusted by
loosening the height-adjust collar
6
by rotating it in the
direction of the arrow shown in Figure E.
2. Move the upper housing straight up or down. When the
desired height is achieved, tighten the collar by rotating it
opposite of the direction shown in FigureE.
Releasing the Cutting Line (Fig.A)
In transit, the cutting line is taped to the spool housing
10
.
• Remove the tape holding the cutting line to the
spoolhousing.
OPERATION
Instructions for Use
WARNING: Always observe the safety
instructions and applicableregulations.
WARNING: To reduce the risk of serious
personal injury, turn tool off and disconnect battery
pack before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.
Proper Hand Position (Fig.A, I)
WARNING: To reduce the risk of serious
personal injury, ALWAYS use proper hand position
asshown.
WARNING: To reduce the risk of serious
personal injury, ALWAYS hold securely in anticipation of a
suddenreaction.
Proper hand position requires one hand on the main
handle
13
and one hand on the auxiliary handle
4
.
Switching Trimmer On and Off (Fig.A)
To turn the appliance on, squeeze the lock-off lever
2
and then
the variable speed trigger
1
. Once the unit is running, you may
release the lock off lever. To turn the appliance off, release the
variable speedtrigger.
WARNING: Never attempt to lock the trigger
in the onposition.
Speed Control Switch (Fig.A)
This string trimmer gives you the choice to operate at a
more efficient speed to extend the runtime for larger jobs, or
accelerate the trimmer speed for high-performancecutting.
To extend runtime, pull the speed control switch back toward
the battery housing
10
into the "LO" position. This mode is best
for larger projects that require more time tocomplete.
To accelerate the trimmer, push the speed control switch
3
forward toward the auxillary handle
4
into the "HI" position.
This mode is best to cut through heavier growth and for
applications that need higherRPM.
NOTE: When in "HI" mode, runtime will be decreased as
compared to when trimmer is in "LO"mode.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SFMCSTB963 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SFMCSTB963 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info