720559

Stanley SFMCPS620 Manual

10
Zoom out
Zoom in
Previous page
1/192
Next page
8
ENGLISH
its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and
any other condition that may affect its operation. A guard
or other part that is damaged should be properly repaired
or replaced by an authorized service center unless indicated
elsewhere in thismanual.
SAVE THESE INSTRUCTIONS
WARNING - Do not operate near electrical power
lines. The unit has not been designed to provide
protection from electric shock in the event of contact with
overhead electric lines, Consult local regulations for safe
distances from overhead electric power lines and ensure
that the operating position is safe and secure before
operating the saw chain polepruner.
• Keep all parts of the body away from the saw chain. Do
not remove cut material or hold material to be cut when
blades are moving. Make sure the switch is off when
clearing jammed material. Blades coast after turn off.
A moment of inattention while operating the pole saw may
result in serious personalinjury.
• Carry the pole saw by the handle with the saw chain
stopped. When transporting or storing the pole saw always
fit the saw chain device cover. Proper handling of the pole saw
will reduce possible personal injury from the sawchain.
• Hold the power tool by insulated gripping surfaces only,
because the cutter blade may contact hidden wiring.
A saw chain contacting a “live” wire may make exposed
metal parts of the tool “live” and could give the operator an
electricshock.
• Do not use the pole saw in bad weather conditions,
especially when there is a risk of lightning. This decreases
the risk of being struck bylightning.
• Always use two hands when operating the pole saw.
Hold the pole saw with both hands to avoid lossofcontrol.
• Always use head protection when operating the
pole saw overhead. Falling debris can result in serious
personalinjury.
SPECIFIC SAFETY RULES
WARNING: Some dust contains chemicals known to
State of California to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• compounds in fertilizers,
• compounds in insecticides, herbicides andpesticides,
• arsenic and chromium from chemically
treatedlumber.
To reduce your exposure to these chemicals, wear
approved safety equipment such as dust masks that are
specially designed to filter out microscopicparticles.
• Avoid prolonged contact with dust from power sanding,
sawing, grinding, drilling, and other construction
activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may promote absorption of
harmfulchemicals.
WARNING: Use of this tool can generate and/
or disburse dust, which may cause serious and
permanent respiratory or other injury. Always use
approved respiratory protection appropriate for the dust
exposure. Direct particles away from face andbody.
CAUTION: Wear appropriate personal hearing protection
during use. Under some conditions and duration of use,
noise from this product may contribute to hearingloss.
Before Operating Pole Saw
• For safe operation, read and understand all instructions
before using the pole saw. Follow all safety instructions.
Failure to follow all safety instructions listed below, can result
in serious personalinjury.
• Watch what you are doing. Use common sense. Do not
operate pole saw when you aretired.
• Use pole saw for cutting tree branches only. Do not use
pole saw for purposes not intended. Do not use for cutting
otheritems.
• Only well-instructed adults should operate pole saw.
Never allow children tooperate.
• Do not allow children or untrained individuals to use
thisunit.
• Wear the following safety gear when operating pole saw:
- heavy-duty gloves
- steel-toed safety footwear with non-skid soles
- safety glasses, goggles or face screen
- safety hard hat
- ear mufflers or ear plugs
- face or dust mask (if working in dusty areas)
• Wear heavy long pants and boots. Do not wear loose
fitting clothing, short pants, jewelry of any kind, or gobarefoot.
• Secure long hair so it is above shoulder level to prevent
entanglement in any movingparts.
• Before cutting, always provide the following:
- clear work area
- secure footing
- planned retreat path from falling limbs
• Inspect tree before trimming. Make allowance for branches to
fall freely to theground.
• Do not use your pole saw to fellsaplings.
While Operating Pole Saw
DANGER: To reduce the risk of electric shock do no
use on wet surfaces. Do not expose to rain. Storeindoors.
DANGER: Avoid Unintentional Starting – with battery
installed, don’t carry appliance with with finger on switch.
Be sure switch is off when installingbattery.
• Stay alert. Use common sense while operating theunit.
• Keep work area clean. Cluttered areas inviteinjuries.
• Always remove battery from pole saw when finished cutting or
when leftunattended.
• Keep children, animals and bystanders at least 15 m away
from pole saw. Only pole saw user should be in workarea.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SFMCPS620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SFMCPS620 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 18,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info