720496
9
Zoom out
Zoom in
Previous page
1/156
Next page
7
ENGLISH
Keep children, animals and bystanders at a safe distance
away from Pole Hedge Trimmer. Only Pole Hedge Trimmer user
should be in workarea.
Grip Pole Hedge Trimmer securely - one hand on the foam
gripper, the other on the mainhandle.
Keep finger off trigger until ready touse.
Before starting Pole Hedge Trimmer, make sure blades are not
touchinganything.
Keep all parts of body away from blades when Pole Hedge
Trimmer isrunning.
Carry Pole Hedge Trimmer from one place to another
- with battery removed
- by holding pole at balance point
- with blades to rear
Do not operate in poorlighting.
During operation, rest periodically and change working
positions to reducefatigue.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure to
sharpsurfaces.
Do not, under any circumstance, use any attachment or
accessory on this product, which was not provided with the
product, or identified as appropriate for use with this product
in this InstructionManual.
Do Not Operate Pole Hedge Trimmer
While under the influence of alcohol, medication, or drugs in
rain or in damp or wet areas
Where highly flammable liquids or gases are present
If Pole Hedge Trimmer is damaged, adjusted wrong, or not fully
and securely assembled
If trigger does not turn Pole Hedge Trimmer on and off. Blades
must stop moving when you release trigger. Have faulty switch
replaced by authorized service center. SeeRepairs.
While in a hurry
While in tree or on a ladder
While on aerial booms, buckets or platforms
During high wind or storming weather
General Safety Rules
WARNING: Shock Hazard. To protect yourself from
electrocution, do not operate within 10 feet (3 m) of
overhead electrical lines. Consult local regulations for safe
distances from overhead electric power lines and ensure
that the operating position is safe and secure before
operating the extended reach hedge trimmer. Failure to do
this could result in severe personalinjury.
Keep the handles dry, clean, and free ofoil.
Make sure cutting blades have stopped before setting
unitdown.
DANGER: RISK OF CUT. Keep hands away from blades.
Keep both hands on handles when Pole Hedge Trimmer
ison.
DO NOT ATTEMPT to remove cut material or hold material
to be cut when blades are moving. Remove battery when
clearing jammed material from blades. Do not grasp the
exposed cutting blades or cutting edges when picking up or
holding the Pole HedgeTrimmer.
CAUTION: Blades coast after turnoff.
DON’T FORCE POLE HEDGE TRIMMER - It will do the job
better and with less likelihood of a risk of injury at the rate for
which it wasdesigned.
DISCONNECT BATTERY from the Pole Hedge Trimmer when
not in use or when servicing orcleaning.
STORE IDLE POLE HEDGE TRIMMER INDOORS - When not
in use, Pole Hedge Trimmer should be stored indoors in a dry
and high or locked-up place out of reach ofchildren.
MAINTAIN POLE HEDGE TRIMMER WITH CARE - Keep
cutting blades sharp and clean for best performance and to
reduce the risk of injury. Keep handles dry, clean and free from
oil andgrease.
CHECK DAMAGED PARTS - Before further use of the Pole
Hedge Trimmer, a guard or other part that is damaged should
be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting and any other condition that may affect its
operation. A guard or other part that is damaged should be
properly repaired or replaced by an authorized service center
unless otherwise indicated elsewhere in thismanual.
Service
Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel could result in a risk of injury. SeeRepairs.
When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section of
this manual. Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of electric shock
orinjury.
Specific Safety Rules
Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool may
contact hidden wiring. Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock theoperator.
Residual Risks
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These risks
can arise from misuse, prolonged useetc.
Even with the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks can
not be avoided. These include:
Injuries caused by touching any rotating/movingparts.
Injuries caused when changing any parts, blades
oraccessories.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SFMCPH845 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SFMCPH845 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info