Manual Stanley SFMCN616 (page 6 of 124) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

720810

Zoom out

Zoom in

1/124

ENGLISH

(Original instructions)

nails, screws, or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a re.

d. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, ush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

e. Do not use a battery pack or tool that is damaged or

modied. Damaged or modied batteries may exhibit

unpredictable behaviour resulting in re, explosion or risk

of injury.

f. Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or temperature

above 130 °C may cause explosion.

g. Follow all charging instructions and do not charge the

battery pack or tool outside the temperature range

specied in the instructions. Charging improperly or at

temperatures outside the specied range may damage the

battery and increase the risk of re.

6. Service

a. Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

b. Never service damaged BATTERY packs. Service of

BATTERY packs should only be performed by the

manufacturer or authorized service providers.

Additional power tool safety warnings

u Use auxiliary handles supplied with the tool. Loss of

control can cause personal injury.

u Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory

may contact hidden wiring. Cutting accessory contacting

a "live" wire may make exposed metal parts of the power

tool "live" and could give the operator an electric shock.

u Hold the power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring or its own cord. Fasteners

contacting a "live" wire may make exposed metal

parts of the power tool "live" and could give the

operator an electric shock.

u Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding the

work by hand or against your body leaves it unstable and

may lead to loss of control.

u Before drilling into walls, oors or ceilings, check for the

location of wiring and pipes.

u Avoid touching the tip of a drill bit just after drilling, as it

may be hot.

u The intended use is described in this instruction manual.

The use of any accessory or attachment or performance

of any operation with this tool other than those

recommended in this instruction manual may present a

risk of personal injury and/or damage to property.

Safety of others

u Never allow children, persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge or people unfamiliar with these instructions to

use the machine,

u Local regulations may restrict the age of the operator.

u Never operate the machine while people, especially

children, or pets are nearby.

Additional Safety Instructions for Cordless Nailers

u Always wear safety glasses.

u Always wear ear protection.

u Only use fasteners of the type specied in the manual.

u Do not use any stands for mounting the tool to

a support.

u Do not disassemble or block any parts of the fastener

driving tool such as the contact trip.

u Prior to each operation check that the safety and

triggering mechanism is functioning properly and that

all nuts and bolts are tight.

u Do not use the tool as a hammer.

u Do not use the tool on a ladder.

u Never point any operational fastener driving tool at

yourself or at any other person.

u While working, hold the tool in such a way that no

injuries can be caused to the head or to the body in

the event of a possible recoil due to a disruption in

the energy supply or hard areas within the work piece.

u Never actuate the fastener driving tool into free space.

u In the work area, carry the tool at the workplace using

only one handle, and never with the trigger actuated.

u Consider the conditions in the work area Fasteners

can penetrate thin work pieces or slip off corners and

edges of the work piece, and thus put people at risk.

u Do not drive fasteners close to the edge of the

work piece.

u Do not drive fasteners on top of other fasteners.

u Always assume that the tool contains fasteners.

Careless handling of the nailer can result in unexpected

ring of fasteners and personal injury.

u Do not point the tool towards yourself or anyone

nearby. Unexpected triggering will discharge the fastener

causing injury.

u Do not actuate the tool unless it is placed rmly

against the workpiece. If the tool is not in contact, the

fastener may be deected away from your target.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SFMCN616 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SFMCN616 Manual

Product: