720656
7
Zoom out
Zoom in
Previous page
1/68
Next page
7
ENGLISH
(Original instructions)
Hot/Cold Pack Delay:
Green LED Intermittent
Red LED Solid
Note: The compatible charger(s) will not charge a faulty
battery pack. The charger will indicate a faulty battery pack by
refusing to light.
Note: This could also mean a problem with a charger. If the
charger indicates a problem, take the charger and battery
pack to be tested at an authorized service centre.
Leaving the battery in the charger
The charger and battery pack can be left connected with the
LED glowing indenitely. The charger will keep the battery
pack fresh and fully charged.
Hot/Cold Pack Delay
When the charger detects a battery that is too hot or too
cold, it automatically starts a Hot/Cold Pack Delay, the green
LED (5a) will ash intermittently, while the red LED (5b) will
remain on continuously, suspending charging until the battery
has reached an appropriate temperature. The charger then
automatically switches to the pack charging mode. This
feature ensures maximum battery life.
Battery state of charge indicator (Fig. B)
The battery includes a state of charge indicator to quickly
determine the extent of battery life as shown in gure B. By
pressing the state of charge button (3a) you can easily view
the charge remaining in the battery as illustrated in gure B.
Installing and Removing the Battery Pack from
the tool
To install battery pack (Fig. C)
Insert battery pack rmly into tool until an audible click is
heard as shown in gure C. Ensure battery pack is fully
seated and fully latched into position.
To remove battery pack (Fig. D)
Depress the battery release button (4) as shown in
gure D and pull battery pack out of tool.
Belt hook (Optional extra) (Fig. E, F)
@
Warning! To reduce the risk of serious personal
injury, ONLY use the tool’s belt hook (6) to hang the
tool from a work belt. DO NOT use the belt hook (6)
for tethering or securing the tool to a person or object
during use. DO NOT suspend tool overhead or
suspend objects from the belt hook.
@
Warning! To reduce the risk of serious personal
injury, ensure the screw (7) holding the belt hook
is secure.
Note: When attaching or replacing the belt hook (6), use only
the screw (7) that is provided. Be sure to securely tighten
the screw.
The belt hook (6) can be be attached to either side of the tool
using only the screw (6) provided, to accommodate left- or
right- handed users. If the hook is not desired at all, it can be
removed from the tool.
To move the belt hook, remove the screw (7) that holds the
belt hook (6) in place then reassemble on the opposite side.
Be sure to securely tighten the screw (7).
The belt hook (6) can be be attached by sliding into the
slots (8) on either side of the tool using only the screw (7)
provided, to accommodate left- or right- handed users. If the
hook is not desired at all, it can be removed from the tool.
To move the belt hook, remove the screw (7) that holds the
belt hook (6) in place then reassemble on the opposite side.
Be sure to securely tighten the screw (7).
Note: Various trackwall hooks and storage congurations are
available.
Please visit our website www.stanleytools.eu/3 for
further information.
Switching on and off (Fig. G)
To switch the torch on press in the switch (1)
To switch the torch off press in the switch (1)
The pivoting lens (Fig. G)
For your convienience, the lens (2) can be pivoted into a
range of positions.
Maintenance
Your STANLEY FATMAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
@
Warning! Before performing any maintenance on
the tool, remove the battery from the tool. Unplug the
charger before cleaning it.
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SFMCL020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SFMCL020 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info