Manual Stanley SFMCF900 (page 8 of 80) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

720809

Zoom out

Zoom in

1/80

ENGLISH

(Original instructions)

Installing and Removing the Battery Pack from

the tool

Warning! Make certain the lock-off button is engaged

to prevent switch actuation before removing or

installing battery.

To install battery pack (Fig. C)

● Insert battery pack rmly into tool until an audible click is

heard as shown in gure C. Ensure battery pack is fully

seated and fully latched into position.

To remove battery pack (Fig. D)

● Depress the battery release button (5) as shown in

gure D and pull battery pack out of tool.

Belt hook (Optional extra) (Fig. E, F)

Warning! To reduce the risk of serious personal

injury, place the forward/reverse button in the lock-off

position or turn tool off and disconnect battery pack

before making any adjustments or removing/installing

attachments or accessories. An accidental start-up

can cause injury.

Warning! To reduce the risk of serious personal

injury, ONLY use the tool’s belt hook (9) to hang the

tool from a work belt. DO NOT use the belt hook (9)

for tethering or securing the tool to a person or object

during use. DO NOT suspend tool overhead or

suspend objects from the belt hook.

Warning! To reduce the risk of serious personal

injury, ensure the screw (10) holding the belt hook

is secure.

Note: When attaching or replacing the belt hook (9), use only

the screw (10) that is provided. Be sure to securely tighten

the screw.

The belt hook (9) can be be attached by sliding into the

slots (8) on either side of the tool using only the screw (10)

provided, to accommodate left- or right- handed users. If the

hook is not desired at all, it can be removed from the tool.

To move the belt hook, remove the screw (10) that holds the

belt hook (9) in place then reassemble on the opposite side.

Be sure to securely tighten the screw (10).

Note: Various trackwall hooks and storage congurations

are available.

Please visit our website www.stanleytools.eu/3 for

further information.

Install accessory (Fig. G)

Warning! Use only impact accessories. Nonimpact

accessories may break and cause a hazardous

condition. Inspect accessories prior to use to ensure

that it contains no cracks.

● To install an accessory (11), rmly push accessory onto

the 12.7 mm hog ring anvil (3) . The hog ring compresses

to allow the accessory to slide on. After the accessory is

installed, the hog ring applies pressure to help provide

accessory retention.

Remove Accessory

● To remove an accessory, grasp the accessory and rmly

pull it off the 12.7 mm hog ring anvil.

Use

Warning! Let the tool work at its own pace. Do

not overload.

Selecting the direction of rotation (Fig. H)

For tightening, use forward (clockwise) rotation. For loosening,

use reverse (counterclockwise) rotation.

● To select forward rotation, push the forward/reverse

slider (2) to the left.

● To select reverse rotation, push the forward/reverse slider

to the right.

● To lock the tool, set the forward/reverse slider into the

centre position.

LED work light

The LED work light (7) is activated automatically when

the trigger is depressed. The LED work light will illuminate

when the trigger is partially depressed, before the unit

begins running.

Maintenance

Your Stanley FatMax tool has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on

the tool, remove the battery from the tool. Unplug the

charger before cleaning it.

● Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SFMCF900 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SFMCF900 Manual

Product: