720420
8
Zoom out
Zoom in
Previous page
1/28
Next page
ENGLISH (Original instructions)
8
Maintenance
Before and after each use, check the product and
accessories (or attachments) for wear and damage. If
required, exchange them for new ones as described
in this instruction manual. Observe the technical
requirements.
Repair
This product does not contain any parts that can be
repaired by the consumer. Contact an authorised service
centre or a similarly qualified person to have it checked and
repaired.
Storage
Switch the product off and disconnect it from the power
supply.
Clean the product as described above.
Store the product and its accessories in a dark, dry,
frostfree, well-ventilated place. Always store the
product in a place that is inaccessible to children. The
ideal storage temperature is between 10°C and 30°C.
We recommend using the original package for storage
or covering the product with a suitable cloth or
enclosure to protect it against dust.
Transportation
Switch the product off and disconnect it from the power
supply.
Attach transportation guards, if applicable.
Always carry the product by its handles (2).
Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
Secure the product to prevent it from slipping or falling
over.
Troubleshooting
Suspected malfunctions are often due to causes that the
users can fix themselves. Therefore check the product
using this section. In most cases the problem can be solved
quickly.
Problem Possible
Cause
Solution
Product does not
start
Not connected to
power
supply
Connect to power
supply
Power cord or
plug is
defective
Check by a
specialist
electrician
Other electrical
defect to
the product
Check by a
specialist
electrician
Product does not
reach full power
Extension cord
not suitable for
operation with
this product
Use a proper
extension cord
Power source
(e.g.
generator) has
too low
voltage
Connect to
another
power source
Air vents are
blocked
Clean the air
vents
Unsatisfactory
result
Stirrer is worn Replace with new
one
Stirrer not
suitable for
material to be
mixed
Use proper stirrer
Maintenance
Your tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning! Before performing any maintenance, switch off
and unplug the tool.
Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stanley product needs
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product
Remarks
Stanley’s policy is one of continuous improvement
to our products and as such, we reserve the right to
modify product specifications without prior notice.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SDR1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SDR1400 in the language / languages: English, French as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info