720471

Stanley SCD12 Manual

13
Zoom out
Zoom in
Previous page
1/14
Next page
13
ENGLISH
SPECIFICATION
SCD12
Technical data
Voltage V
DC
10.8
No-load speed:
1st gear min
-1
0–400
2nd gear min
-1
0–1500
Max torque Nm 26
Power output (MWO) W 180
Chuck capacity mm 10
Maximum drilling capacity:
Wood mm 20
Meta mm 10
CHARGER SC121
Input Voltage V
AC
220-240
Output Voltage V
DC
22
Output Current(DC) A 1.25
Approx. charge time min 70(1.5Ah)
Battery SB12S
Voltage V
DC
10.8
Capacity Ah 1.5
Type Li-Ion
LEVEL OF SOUND PRESSURE ACCORDING TO EN
60745:
Sound pressure (LpA) 65.0 dB(A), uncertainty (K) 3 dB(A)
Sound power (LWA) 76.0 dB(A), uncertainty (K) 3 dB(A)
VIBRATION TOTAL VALUES (TRIAX VECTOR SUM)
ACCORDING TO EN 60745:
Screwdriving (ah, S) 0.9 m/s
2
, uncertainty (K) 1.5 m/s
2
Drilling into metal (ah, D) 1.1m/s
2
, uncertainty (K) 1.5 m/s
2
VIBRATION
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured
in accordance with a standard test method provided by EN
60745 and may be used for comparing one tool with another.
The declared vibration emission value may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission value during actual use of
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level may
increase above the
level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide
customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact the
STANLEY location nearest you.
TWO YEARS WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, STANLEY guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual.
• The p
roduct has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorised persons;
• Proof of purchase is produced;
• The STANLEY product is returned complete with all original
components.
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in
the STANLEY catalogue or contact your local STANLEY office
at the address indicated in this manual. A list of authorised
STANLEY repair agents and full details of our after sales
service is available on the internet at:
www.2helpU.com
… 13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SCD12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SCD12 in the language / languages: English, French, Portuguese, Turkish as an attachment in your email.

The manual is 10,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info