720433

Stanley KFFMED1250 Manual

7
Zoom out
Zoom in
Previous page
1/52
Next page
7
ENGLISH
(Original instructions)
Technical data
KFFMED1250 (Type 1)
Input voltage V
AC
230
Power input W 1250
No-load speed min
-1
0~850
Impact rate min
-1
0~4100
Impact energy per stroke according
to EPTA-Procedure 05/2009
j
3.2
Weight kg
5.4
Max. drilling capacity
Concrete mm
32
Steel mm
13
Wood mm
40
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
)
93
dB(A), uncertainty (K)
3
dB(A)
Sound power (L
WA
)
104
dB(A), uncertainty (K)
3
dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Impact drilling into concrete (a
h, ID
)
14.2
m/s
2
, uncertainty (K)
1,5
m/s
2
Chiselling (a
h, Cheq
)
13.6
m/s
2
, uncertainty (K)
1,5
m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
KFFMED1250 Rotary hammer drill
Stanley Europe declares that these products described under
"technical data" are in compliance with:
EN60745-1:2009+A11:2010, EN60745-2-1:2010.
These products also comply with directive
2014/30/EU, 2006/42/EC and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal le and makes this declaration on behalf of
Stanley FatMax.
R. Laverick
Director of Engineering
Stanley Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
20/02/2018
Brushmonitor(g.C)
Your tool has a built in system that monitors the health of the
brushes.
u Green brush monitor indicator (17). The brushes are in
good condition.
u Red brush monitor indicator (18). The brushes are warn
and need replacing, return your tool to an authorised
Stanley Europe Service Centre in order to to have the
brushes replaced.
Accessories
The performance of your tool depends on the accessory used.
Stanley Fat Max accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
uSwitch off and unplug the appliance/tool.
uRegularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
uRegularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
uRegularly open the chuck and tap it to remove any dust
from the interior (when tted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
uSafely dispose of the old plug.
uConnect the brown lead to the live terminal in the new
plug.
uConnect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley KFFMED1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley KFFMED1250 in the language / languages: English, German, French, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info