622248
10
Zoom out
Zoom in
Previous page
1/208
Next page

User Manual
GB

Checking the vertical (plumb) calibration of the
laser can be most accurately done when there is

30' (9m), with one person on the floor positioning

the position of the beam. It is important to conduct

the distance of the applications for which the tool
will be used.

Place the laser on the floor and turn on both
vertical beams.
2.
Mark position (f) where the beams cross on the
floor position, also marking position (g) on the floor
and also marking where the beams cross on the
ceiling (h). Always mark the center of the beams’
thickness.
3.

the beam crossing is exactly on the original marks
(f,g) on the floor.
4.
Mark the position where the beams cross on the
ceiling (j).

Measure the distance between the two ceiling
marks (h, j). If the measurement is greater than the
values shown below, the laser must be serviced at
an authorized service center.
Distance
Between Walls
Allowable Distance
Between Marks
 
 
 
 
30' (9.0m) 

BEAMS (FIG. H)
Checking 90º accuracy requires an open floor area at

position of the laser at each step and for the location
of the marks made at each step. Always mark the
center of the beams’ thickness.

Set up the laser in one corner of the floor and turn
on the side vertical beam.
2.
Mark the center of the beam at three locations
(a, b and c) on the floor along the laser line. Mark

3.
Move the laser to mark b and turn on both vertical
beams.
4.
Position the beam crossing precisely at mark b,





Rotate the laser over mark b so that the side
vertical beam now passes through mark d.
7.
Mark the location (e) where the side vertical beam
passes by mark a.


the measurement is greater than the values shown
below, the laser must be serviced at an authorized
service center.
Distance

Allowable Distance
Between Marks
 
 
 
23' (7.0m) 
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FMHT77357 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMHT77357 in the language / languages: All languages as an attachment in your email.

The manual is 12,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info