622247
9
Zoom out
Zoom in
Previous page
1/208
Next page
9
Accuracy Check and
Calibration
NOTE:
The laser tools are sealed and calibrated at the



future use.
The laser tool should be checked regularly to ensure
its accuracies, especially for precise layouts.
When performing the accuracy checks, use the


the easier to measure the accuracy of the laser.
The lock must be in the unlocked position to allow
the laser tool to self-level before checking the
accuracy.

SCAN DIRECTION (FIG. E)
Checking the horizontal scan calibration of the laser
requires two walls 30' (9m) apart. It is important to

than the distance of the applications for which the tool
will be used.



facing straight ahead toward the opposing wall

2.

vertical beam, mark the beam position on the
opposing wall directly across from the laser. Always

3.
Pivot the laser -90 degree to the left of center and
mark the beam position (a) on the opposing wall.
4.
Pivot the laser +90 degrees to the right of center
and mark the beam position (b) on the opposing
wall.

Measure the vertical distance between the
lowest mark (a) and the highest mark (b). If the
measurement is greater than the values shown
below, the laser must be serviced at an authorized
service center.
Distance
Between Walls
Allowable Distance
Between Marks
30' (9.0m) 
 
 

PITCH DIRECTION (FIG. F)
Checking the horizontal pitch calibration of the



applications for which the tool will be used.


bracket or mount on tripod close to the wall
with the laser facing straight ahead toward the
opposing wall (0 degree position).
2.

laser toward the opposite wall and approximately
parallel to the adjacent wall.
3.
Mark the center of the beam at two locations (c, d)
at least 30' (9m) apart.
4.
Reposition the laser to the opposite wall with the
laser facing straight ahead toward the first wall



laser back toward the first wall and approximately
parallel to the adjacent wall.

Adjust the height of the laser so that the center of
the beam is aligned with the nearest mark (d).
7.
Mark the center of the beam (e) directly above or
below the farthest mark (c).

Measure the distance between these two marks

shown below, the laser must be serviced at an
authorized service center.
Distance
Between Walls
Allowable Distance
Between Marks
 
 
 
 
30' (9.0m) 
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FMHT77356 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMHT77356 in the language / languages: All languages as an attachment in your email.

The manual is 12,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info