Manual Stanley FMHT1-77414 (page 7 of 198) (All languages)

720739

Zoom out

Zoom in

1/198

• Do not operate the laser in explosive atmospheres,

such as in the presence of ammable liquids, gases,

or dust. This tool may create sparks which may ignite the

dust or fumes.

• Store an idle laser out of reach of children and other

untrained persons. Lasers are dangerous in the hands of

untrained users.

• Tool service MUST be performed by qualied repair

personnel. Service or maintenance performed by unqualied

personnel may result in injury. To locate your nearest Stanley

service center go to http://www.2helpU.com.

• Do not use optical tools such as a telescope or transit to

view the laser beam. Serious eye injury could result.

• Do not place the laser in a position which may cause

anyone to intentionally or unintentionally stare into the

laser beam. Serious eye injury could result.

• Do not position the laser near a reective surface which

may reect the laser beam toward anyone’s eyes. Serious

eye injury could result.

• Turn the laser off when it is not in use. Leaving the laser

on increases the risk of staring into the laser beam.

• Do not modify the laser in any way. Modifying the tool may

result in hazardous laser radiation exposure.

• Do not operate the laser around children or allow

children to operate the laser. Serious eye injury may result.

• Do not remove or deface warning labels. If labels are

removed, the user or others may inadvertently expose

themselves to radiation.

• Position the laser securely on a level surface. If the laser

falls, damage to the laser or serious injury could result.

Personal Safety

• Stay alert, watch what you are doing, and use common

sense when operating the laser. Do not use the laser when

you are tired or under the inuence of drugs, alcohol, or

medication. A moment of inattention while operating the laser

may result in serious personal injury.

• Use personal protective equipment. Always wear eye

protection. Depending on the work conditions, wearing

protective equipment such as a dust mask, non-skid safety

shoes, hard hat, and hearing protection will reduce personal

injury.

Tool Use and Care

• Do not use the laser if the Power/Transport Lock switch

does not turn the laser on or off. Any tool that cannot be

controlled with the switch is dangerous and must be repaired.

• Follow instructions in the Maintenance section of this

manual. Use of unauthorized parts or failure to follow

Maintenance instructions may create a risk of electric shock

or injury.

Battery Safety

WARNING:

Batteries can explode, or leak, and can cause

injury or re. To reduce this risk:

• Carefully follow all instructions and warnings on the battery

label and package.

• Always insert batteries correctly with regard to polarity

(+ and –), as marked on the battery and the equipment.

• Do not short battery terminals.

• Do not charge disposable batteries.

• Do not mix old and new batteries. Replace all batteries at the

same time with new batteries of the same brand and type.

• Remove dead batteries immediately and dispose of per

local codes.

• Do not dispose of batteries in re.

• Keep batteries out of reach of children.

• Remove batteries when the device is not in use.

Installing AA Batteries

Load new AA batteries in the FMHT1-77414 or FMHT1-

77438 laser. In the FMHT1-77438 laser you can also load AA

rechargeable batteries. When using rechargeable batteries,

refer to the Stanley FatMax FMHT80690 Charger Manual.

Turn the laser upside down.

On the laser, lift up the latch to open the battery compartment

cover (Figure

#1).

Insert four new, high-quality, name brand AA batteries, making

sure to position the - and + ends of each battery as noted inside

the battery compartment (Figure

#2).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMHT1-77414 in the language / languages: All languages as an attachment in your email.

The manual is 16,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley FMHT1-77414 Manual

Product: