720797
17
Zoom out
Zoom in
Previous page
1/174
Next page
17
Do not operate the meter with the battery cover or portions of the
case removed or loosened.
To avoid false readings, which could lead to possible electric shock
or personal injury, replace the battery as soon as the low battery
indicator (”
”)appears.
Do not use the meter in a manner not specified by this manual or the
safety features of the meter may be impaired.
When in Relative mode (the symbol
is displayed) or in Data
Hold mode (the symbol
is displayed), caution must be used
because hazardous voltage may be present.
Do not touch any naked conductor with hand or skin.
Do not ground yourself.
Do not operate this meter if your hand or the meter is wet.
Adhere to local and national safety codes. Use Individual protective
equipment to prevent shock and arc blast injury when working in an
area where hazardous live conductors are exposed.
Use only the test leads specified by the factory.
During replacement of fuses, please only use the spare fuses from
Stanley Fatmax.
Remaining endangerment: When an input terminal is connected to
dangerous live potential it is to be noted that this potential at all other
terminals can occur!
CAT III - Measurement category III is for measurements performed
in the building installation. Examples are measurements on distribution
boards, circuit breakers, wiring, including cables, bus-bars, junction
boxes, switches, socket-outlets in the fixed installation, and equipment
for industrial use and some other equipment, for example, stationary
motors with permanent connection to fixed installation. Do not use the
meter for measurements within Measurement Categories IV.
Caution
To avoid possible damage to the meter or to the equipment under test,
follow these guidelines:
Disconnect circuit power and discharge all capacitors before testing
resistance, diode, capacitor and continuity.
Use the proper terminals, function, and range for your
measurements.
Before measuring current, check the meter‘s fuses and turn off the
power to the circuit before connecting the meter to the circuit.
Before rotating the range switch to change functions, disconnect
test leads from the circuit under test.
Symbol
Alternating Current
Direct Current
DC orAC
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FMHT0-77421 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMHT0-77421 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 17,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info