720430
6
Zoom out
Zoom in
Previous page
1/60
Next page
6
ENGLISH
(Original instructions)
uSet the depth gauge (not supplied) to the desired position.
The maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth gauge.
uTighten the side handle by turning the grip clockwise.
Fittinganaccessory(g.B)
uOpen the chuck by turning the sleeve (6) counterclock-
wise.
uInsert the bit shaft (9) into the chuck.
uTighten the chuck by turning the sleeve clockwise.
Use
Warning! Let the tool work at its own pace. Do not overload.
Warning! Before drilling into walls, oors or ceilings, check for
the location of wiring and pipes.
Switchingonandoff(g.C,D)
u Select the required speed by turning the speed selector
dial (5) as shown in gure C.
uTo switch the tool on, press the variable speed switch (1).
The tool speed depends on how far you press the switch.
uFor continuous operation, press the lock-on button (2) and
release the variable speed switch. This option does not
work in reverse rotation.
uTo switch the tool off, release the variable speed switch.
To switch the tool off when in continuous operation, press
the variable speed switch once more and release it.
Selectingthedirectionofrotation(g.E)
For drilling and tightening screws, use forward
(clockwise)
rotation. For loosening screws or removing a
jammed drill bit,
use reverse (counterclockwise) rotation.
uTo select forward rotation, push the forward/reverse slider
(3) to the left.
uTo select reverse rotation, push the forward/reverse slider
to the right.
Warning! Never change the direction of rotation while the
motor is running.
Selectingthedrillingmode(g.F)
uFor Impact drilling in masonry and concrete, set the
drilling mode selector (4) to the
q
position.
uFor drilling in steel, wood and plastics or for screw driving
set the operating mode selector (4) to the
r
position.
Accessories
The performance of your tool depends on the accessory used.
Stanley Fat Max accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
uSwitch off and unplug the appliance/tool.
uOr switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
uOr run the battery down completely if it is integral and then
switch off.
uUnplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
uRegularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
uRegularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
uRegularly open the chuck and tap it to remove any dust
from the interior (when tted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
uSafely dispose of the old plug.
uConnect the brown lead to the live terminal in the new
plug.
uConnect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries marked with this
symbol must not be disposed of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
FMEH850 (Type 1) FMEH1100 (Type 1)
Input voltage V
AC
230 230
No-load speed min
-1
0~1100/0~3200 0~1100/0~3200
Impact rate min
-1
0~18700/0~54400 0~18700/0~54400
Weight kg
2.4 2.6
Max. drilling capacity
Concrete mm
18 18
Steel mm
13 13
Wood mm
50 50
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FMEH850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMEH850 in the language / languages: All languages as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info