622142
8
Zoom out
Zoom in
Previous page
1/88
Next page
8
ENGLISH
(Original instructions)
9
ENGLISH
(Original instructions)
u In particular clean the air vents (1) after every use with a
cloth and brush.
u Remove stubborn dirt with high pressure air (max. 3 bar).
Note: Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this product as
they might be harmful to its surfaces.
u Check for worn or damaged parts. Replace worn parts
as necessary or contact an authorised service centre for
repair before using the product again.
Maintenance
u Before and after each use, check the product and
accessories (or attachments) for wear and damage. If
required, exchange them for new ones as described in this
instruction manual. Observe the technical requirements.
Repair
This product does not contain any parts that can be repaired
by the consumer. Contact an authorised service centre or a
similarly qualied person to have it checked and repaired.
Storage
u Switch the product off and disconnect it from the power
supply.
u Clean the product as described above.
u Store the product and its accessories in a dark, dry, frost-
free, well-ventilated place.
u Always store the product in a place that is inaccessible to
children. The ideal storage temperature is between 10°C
and 30°C.
u We recommend using the original package for storage or
covering the product with a suitable cloth or enclosure to
protect it against dust.
Transportation
u Switch the product off and disconnect it from the power
supply.
u Attach transportation guards, if applicable.
u Always carry the product by its handles (2).
u Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
u Secure the product to prevent it from slipping or falling
over.
Troubleshooting
Suspected malfunctions are often due to causes that the
users can x themselves. Therefore check the product using
this section. In most cases the problem can be solved quickly.
Problem Possible Cause Solution
Product does not start Not connected to power
supply
Connect to power
supply
Power cord or plug is
defective
Check by a specialist
electrician
Other electrical defect to
the product
Check by a specialist
electrician
Product does not
reach full power
Extension cord not suitable
for operation with this
product
Use a proper
extension cord
Power source (e.g.
generator) has too low
voltage
Connect to another
power source
Air vents are blocked Clean the air vents
Unsatisfactory
result
Stirrer is worn Replace with new
one
Stirrer not suitable for
material to be mixed
Use proper stirrer
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FME190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FME190 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info