Manual Stanley FME190 (page 5 of 88) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

622142

Zoom out

Zoom in

1/88

ENGLISH

(Original instructions)

ENGLISH

(Original instructions)

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. In

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualied repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Additional power tool safety warnings for paddle

mixer.

u Never clamp the product into a vice or to a work bench to

use as a stationary tool. This may cause serious injury.

u Switch the product off immediately if the tool attachment

jams. Be prepared for high reaction torques, which could

cause kickbacks. The tool attachment will jam if the

product is overloaded or becomes twisted in the

workpiece.

u Wear protective clothing, dust masks and protective

gloves when using this product. While this product is

being used, dust may be created or splashing may occur

and material or liquids may be ung around. Many types

of dust are deemed to be carcinogenic.

u Always operate the product with both hands on the

handles. Keep a rm grip on the handles and ensure your

footing is secure on a stable, level and dry ground. Loss

of control over the product can cause personal injury.

u Do not use this product to process substance which is

highly ammable or potentially explosive such as solvents.

Using this product will create sparks which can ignite

vapours.

u Use this product indoors only. Moisture and rain can

damage the product or can lead to electrocution.

from the power supply, if stirred material penetrates into

the inside of the product or if the product falls into the

material being stirred. Have the product inspected by a

professional electrician. Stirred material and moisture

can damage the product or lead to electrocution, if they

penetrate inside the product.

u Do not work with any substances which are harmful

to health. Many materials are noxious when they are

processed.

Do not breathe in any unhealthy substances and avoid

contact with your skin. Follow the manufacturers’

instructions and wear suitable personal protective

equipment.

u Wait until the product has come to a complete standstill,

before removing it from the material being stirred and

putting it down. The bucket can get jammed or stirred

material can be ung around. This can lead to a loss of

control over the product.

Residual risks.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving parts.

u Impairment of hearing.

u Risk of injury when changing any parts, or accessories.

u Health hazards caused by breathing dust developed when

sawing wood, especially oak, beech and MDF.

u Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

Safety of others

u This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

u Children should be supervised to ensure that they do not

play with the appliance.

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by

EN 60745 and may be used for comparing one tool with

another. The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level

may increase above the level stated. When assessing

vibration exposure to determine safety measures required by

2002/44/EC to protect persons regularly using power tools

in employment, an estimation of vibration exposure should

consider, the actual conditions of use and the way the tool

is used, including taking account of all parts of the operating

cycle such as the times when the tool is switched off and

when it is running idle in addition to the trigger time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FME190 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley FME190 Manual

Product: