720400
7
Zoom out
Zoom in
Previous page
1/8
Next page
7
ENGLISH
(Original instructions)
Warning! Do not apply chisels when the tool is in the drilling
mode.
Switching on and off (g. G)
u To switch the tool on, press the on/off switch (1).
u To switch the tool off, release the on/off switch.
Forward/reverse action (g. H)
u Move the selecter (2) to indicate the direction you require.
Selecting the operating mode (g. I)
The tool can be used in three operating modes.
u To operate the operating mode selector (3), push the
unlock button (21) and rotate the selector towards the
required position, as indicated by the symbols.
Drilling
u For drilling in steel, wood and plastics, and for
screwdriving set the operating mode selector (3) to the
position (22).
Hammer drilling
u For hammer drilling in masonry and concrete, set the
operating mode selector (3) to the
position (19).
When hammering, the tool should not bounce and run
smoothly. If necessary, increase the speed.
Hammering
u For hammering with spindle lock, and for light chiselling
and chipping, set the operating mode selector (3) to the
position (20).
u When changing from hammer drilling to chiselling, turn the
chisel to the desired position. If resistance is felt during
mode change, slightly turn the chisel to engage the
spindle lock.
Accessories
The performance of your tool depends on the accessory used.
Stanley Fat Max accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u Switch off and unplug the appliance/tool.
u Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u Regularly open the chuck and tap it to remove any dust
from the interior (when tted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
FMCD900M1S FMCD900M2S FMCD900B
Input voltage V
DC
18 18 18
No-load speed min
-1
0 - 2200 0 - 2200 0 - 2200
Impact rate min
-1
0 - 5775 0 - 5775 0 - 5775
Weight kg
2.80 2.80 2.15
Max. drilling capacity
Concrete mm
20 20 20
Steel mm
13 13 13
Wood mm
30 30 30
Battery
FMC688L FMC688L Not Supplied
Voltage V
DC
18 18
Capacity Ah
4.0 4.0
type
Li-Ion Li-Ion
Charger
906086**
typ. 1
906086**
typ. 1
Not Supplied
Input Voltage V
AC
230 230
Output Voltage V
DC
18 18
Current A
2.0 2.0
Approx. Charge
time
min
120 120
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FMCD900M2S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMCD900M2S in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info