720710
12
Zoom out
Zoom in
Previous page
1/120
Next page
12
ENGLISH
(Original instructions)
Problem Possible Cause Possible Solution
Tool operates,
but does
not drive the
fastener fully.
Low battery charge or
damaged battery.
Depth adjustment set
too shallow.
Tool not rmly applied
to workpiece.
Material and fastener
length too rigorous an
application.
Charge or replace battery.
Rotate depth adjustment
wheel to
a deeper setting.
Read instruction manual.
Choose appropriate material
or fastener length.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool/appliance care and regular cleaning.
Warning! Switch off and unplug the appliance before carrying
out any cleaning.
u Dirt and grease may be removed from the exterior of the
appliance using a cloth.
Warning! NEVER use solvents or other harsh chemicals
for cleaning the non-metallic parts of the appliance. These
chemicals may weaken the materials used in these parts. Use
a cloth dampened only with water and mild soap. Never let
any liquid get inside the unit; never immerse any part of the
unit into a liquid.
Warning! NEVER spray or in any other way apply lubricants
or cleaning solvents inside the tool. This can seriously affect
the life and performance of the tool.
Service Notes
This product is not user serviceable. There are no user
serviceable parts inside the nailer. Servicing at an authorized
service center is required to avoid damage to static sensitive
internal components.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
FMC792 Type:1
Voltage V
DC
18
Barttery Type
Li-Ion
Actuating mode
Sequential
Magazine angle Straight
No load speed rpm 9100
Drive energy approx
60J
Weight (bare tool) kg
2.6
Fasteners
Length mm
25 - 64
Shank diameter mm
1.6
Angle
Straight
Charger
90611165
Input voltage V
AC
230
Output voltage V
DC
18
Current Ah
2.0
Approx. charge time
1 hr (2.0 Ah)
2 hr (4.0 Ah)
Weight (bare
charger)
kg
0.45
Battery
FMC687L FMC688L
Voltage V
AC
18
18
Capacity Ah
2.0ah 4.0ah
Weight kg
0.35 0.67
Type
Li-Ion Li-Ion
Level of sound pressure according to EN 60745 - 1:
Sound pressure (L
pA
) 87 dB(A), uncertainty (K) 1.5 dB(A)
Sound power (L
WA
) 92 dB(A), uncertainty (K) 2.5 dB(A)
Vibration total values (triax vector sum) according to EN 60745 - 2 - 16:
Staple nails (a
h
) 1.8 m/s
2
, uncertainty (K) 1.8 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FMC792 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMC792 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info