Manual Stanley 42-063 (page 2 of 17) (English, German, Dutch, French, Italian, Portuguese, Spanish)

720392

Zoom out

Zoom in

1/17

42-063 / 42-065 / 42-086

Digital Level

OPERATING INSTRUCTIONS

Installing Batteries: See

The battery compartment is located on back of level.

1. Push in on tab and lift cover.

2. Insert (2) AAA batteries as shown.

3. Replace cover & snap in place.

Features: See

1. Plumb Vial

2. Calibration Button

3. Reference Button

4. Unit Button

5. Power Button

6. Hold Button

7. Buzzer/ Backlight Button

8. Level Vial

Display: See

9. Slope Icon

10. Buzzer Icon

11. Hold indicator

12. Ref Indicator

13. Battery life icon

14. Unit icons

Power:

Press Power button

for ~1 sec. to turn on display.

• When powering on, the inclination will be displayed in the

last units selected.

• The slope direction is shown by the slope icon

• The display will automatically power off after 5 minutes of

non-use.

• The display will automatically flip over if the level is used

inverted.

• The battery life icon

displays the power remaining in the

batteries. When Battery life icon is as shown, , there is

~ 1 hour of battery life remaining.

Units:

Press the units button

for ~1 sec. to cycle the display units

between degrees (°), slope (mm/m) or gradient (%).

Hold:

Press the Hold button

to freeze the current angle shown on

the display. Press

again to unfreeze the displayed angle.

Buzzer/Backlight:

Press the Buzzer/Backlight button

for ~1 sec. to activate the

internal buzzer. The buzzer will be heard when the display is at

0, 45 or 90°. Press the button again to ~1 sec. to power off the

buzzer.

Press the Buzzer/Backlight button

for >2 sec. to activate to

display backlight. The backlight will automatically power off after

5 minutes or the button can be pressed again for >2 sec.

Reference Angle:

Press the Reference button

for >2 sec. to reset to current

inclination to 0°. Press the Reference button again to return to

normal angle mode.

Temperature:

Press the Calibrate button

for ~1 sec. to display the current

temperature in °C. Press again for ~1 sec. to display in °F. Press

again to return to normal angle mode.

Re-calibrating the zero set angle of the display:

If the unit is dropped or you suspect inaccuracy of the product,

you can re-calibrate the zero point.

1. Place the level on a flat, level surface as shown below.

2. Press the calibration button

for >4 sec. “CAL 1” will

appear on the display.

3. Press the calibration button

for ~1 sec. “CAL 1” will blink

for ~1 sec. then change to “CAL 2”.

4. Flip the level over so the bottom is now on top, as shown

below.

5. Press the calibration button for ~1 sec. “CAL 2” will blink for

~1 sec. then change to the active angle display.

The 0° reference for the display has been re-calibrated to the

level surface.

SPECIFICATIONS

Power: 3VDC (2) AAA Batteries

(included)

(Alkaline recommended)

Measuring Range:

0-360° (0-90° quadrants)

Digital Angle accuracy:

±0.1° @ level and plumb

±0.2° 1° to 89°

Vial(s) Accuracy:

0.057° (1.0mm/m)

Operating Temperature:

0° to 50°C (32° to 122°F)

Storage Temperature:

-20° to 70°C (-4° to 158°F)

Battery life: ~20 Hrs (w/ backlight)

Shock Resistance:

Up to 1m (3 feet) drop on concrete

Water Resistance:

Water resistant, but not waterproof

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley 42-063 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley 42-063 Manual

Product: