603462

Standard Horizon Quest X - GX1500S Manual

49
Zoom out
Zoom in
Previous page
1/92
Next page
Page 49GX1500S
11.7 POSITION REQUEST
Advancements in DSC have made it possible to poll the location of another
vessel and show the position of that vessel on the display of the GX1500S.
Standard Horizon has taken this feature one step further, if any Standard Hori-
zon GPS is connected to the GX1500S, the polled position of the vessel is
shown on the display of the GPS chart plotter making it easy to navigate to the
location of the polled vessel. This is a great feature for anyone wanting to know
the position of another vessel. For example your buddy that is catching fish, or
finding the location of a person you are cruising with.
NOTE
The other vessel must have an operating GPS receiver connected to its
DSC transceiver and must not have its transceiver set to deny position
requests. (Refer the section “11.5.1 Setting up the Individual / Posi-
tion Call Directory” to enter information into the individual directory).
11.7.1 Setting up Position Reply
The GX1500S can be set up to automatically or manually send your position to
another vessel. This selection is important if you are concerned about someone
polling the position of your vessel that you may not want to. In the manual mode
you will see the MMSI or persons name shown on the display allowing you to
choose to send your position to the requesting vessel.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appear.
2. Turn the CHANNEL selector knob to select “
DSCDSC
DSCDSC
DSC
SetupSetup
SetupSetup
Setup
” menu.
3. Press the
[
ENT
]
key, then select “
POS ReplyPOS Reply
POS ReplyPOS Reply
POS Reply” with
the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select “
AutoAuto
AutoAuto
Auto”
or “
ManualManual
ManualManual
Manual.” In “
AutoAuto
AutoAuto
Auto” mode, after a DSC POS Re-
quest is received, the radio will automatically trans-
mit your vessels position. In “
ManualManual
ManualManual
Manual” mode, the
display of the GX1500S will show who is requesting
the position.
6. Press the
[
ENT
]
key to store the selected setting.
7. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
… 49 …


Need help? Post your question in this forum.

Forumrules
1

Forum

standard-horizon-quest-x---gx1500s

Reset search

  • I was looking to find out ir this model standard horizon questX-gs1500s is capable of accepting expansion chanels Submitted on 4-12-2022 at 19:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Quest X - GX1500S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Quest X - GX1500S in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info