603462
34
Zoom out
Zoom in
Previous page
1/92
Next page
GX1500SPage 34
11.3 DSC DISTRESS CALL
The GX1500S is capable of transmitting and receiving DSC Distress messages
to all DSC radios. The GX1500S may be connected to a GPS to also transmit
the Latitude, Longitude of the vessel.
11.3.1 Transmitting a DSC Distress Call
NOTE
To be able to transmit a DSC distress call an MMSI number must be
programmed, refer to section “11.2.2 Programming the MMSI.”
In order for your ships location to be transmitted a GPS must be connected to
the GX1500S, refer to section “8.4 CONNECTION OF GPS WITH NMEA OUT-
PUT.”
1. Lift the red spring loaded DISTRESS cover and press the
[
DISTRESS
]
key.
The “
DISTRESSDISTRESS
DISTRESSDISTRESS
DISTRESS” menu will appear on the LCD.
2. Press and hold the
[
DISTRESS
]
key. The radios dis-
play will count down (3-2-1) and then transmit the
Distress call.
3. When the distress signal is sent, CH70 and “
icon will appear on the LCD. After the message has
been sent, the radio will sound a Distress Alarm and
display will flash.
4. The transceiver will watch for a DSC acknowledg-
ment transmission on CH70 and also receive calls on
CH16.
5. If an acknowledgement is received, select channel
16 and advise your distress situation.
6. If no acknowledgment is received, the distress call is
repeated in 4 minute intervals until a DSC acknowl-
edgment is received.
7. When a DSC Distress acknowledgment is received,
a distress alarm sounds and channel 16 is automati-
cally selected. The LCD shows the MMSI of the ship responding to your
distress.
RECEIVED ACK: acknowledgment signal is received.
RECEIVED RLY: relay signal is received from another vessel or coast station.
8. To cancel the DSC distress alarm signal from the speaker, press any key.
34


Need help? Post your question in this forum.

Forumrules
1

Forum

standard-horizon-quest-x---gx1500s

Reset search

  • I was looking to find out ir this model standard horizon questX-gs1500s is capable of accepting expansion chanels Submitted on 4-12-2022 at 19:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Quest X - GX1500S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Quest X - GX1500S in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info