603462

Standard Horizon Quest X - GX1500S Manual

30
Zoom out
Zoom in
Previous page
1/92
Next page
GX1500SPage 30
10.12.3 Priority Scanning
(
P-SCAN
)
In the default setting, Channel 16 is set as the priority channel. You may change
the priority channel to the desired channel from the Channel 16 by the Radio
Setup Mode, refer to section “12.6 PRIORITY CHANNEL SET.”
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
CHANNEL selector knob. Press and hold the
[
SCAN
(
MEM
)]
key for one second, “MEM” will ap-
pear on the display which indicates the channel has
been programmed into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the
[
SCAN
(
MEM
)]
key until “MEM” is removed from the
display.
5. To start priority scanning, just press the
[
SCAN
(
MEM
)]
key momentarily. “
P-SCANP-SCAN
P-SCANP-SCAN
P-SCAN” appears on the LCD.
Scanning will proceed between the memorized chan-
nels and the priority channel. The priority channel
will be scanned after each programmed channel.
6. To stop scanning, press the
[
16/9
]
or
[
WX
]
key.
You may change the scan resume time in the Radio Setup Mode, refer to
section “12.8 SCAN RESUME TIME.”
10.13 NAVIGATION INDICATION
The transceiver has the ability to display Time, SOG, COG, as well as the posi-
tion (LAT/LON), when connected to a GPS receiver.
1. Press and hold the
[
H/L
(
NAV
)]
key, display the posi-
tion information on the LCD. If the GPS receiver is
not receiving a fix, the display will be as shown in the
illustration on the right.
NOTE: When Ch16 is selected only lat/lon will shown.
2. To hide the position information, press and hold the
[
H/L
(
NAV
)]
key again.
… 30 …


Need help? Post your question in this forum.

Forumrules
1

Forum

standard-horizon-quest-x---gx1500s

Reset search

  • I was looking to find out ir this model standard horizon questX-gs1500s is capable of accepting expansion chanels Submitted on 4-12-2022 at 19:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Quest X - GX1500S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Quest X - GX1500S in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info