603518

Standard Horizon Quest X - GX1500E Manual

18
Zoom out
Zoom in
Previous page
1/88
Next page
GX1500EPage 18
KEYPAD
[
SCAN
(
MEM
)]
Key
Press this key to start and stop the scanning of programmed channels.
Refer to section “9.12 SCANNING” for details.
Secondary use
To add a channel into the scan memory, select the channel and press
and hold the
[
SCAN
(
MEM
)]
key until “MEM” is shown on the display.
To delete a memorised channel from scan memory, select the channel
and press and hold the
[
SCAN
(
MEM
)]
key until “MEM” is removed from
the display.
[
DW/IC
)]
Key
Pressing this key enables dual watch between a priority channel (Ch16
is the default) and a selected channel until a signal is recieved. When a
signal is received on the selected channel the radio will momentarily switch
to the Priority channel and listen for communications. Refer to section
“9.11 DUAL WATCH
(
TO PRIORITY CHANNEL
)
” for details.
Secondary use
Press and hold this key, when the optional RAM+ Mic or VH-310 Handset
is connected, intercom operation will operate between radio and option
mic or handset. Refer to section “8.14 INTERCOM OPERATION” for de-
tails.
[
H/L
(
NAV
)]
Key
Press this key to toggle the transmit output power between 25 W (High)
and 1 W (Low) power. When the
[
H/L
(
NAV
)]
key is pressed while the
transceiver is on channel 13 or 67, the power will temporarily switch from
LO to HI power until the PTT is released.
The
[
H/L
(
NAV
)]
key does not function on transmit inhibited and low power
only channels.
NOTE: 1W low power is indicated by LO on the display, when 25W high
power is selected the display do not show an indication.
Secondary use
Press and hold this key, the LCD displays NAV GPS Data, Time, SOG
(Speed Over Ground), and COG (Course Over Ground) when a GPS is
connected to the accessory cable of the GX1500E. See section “6.3
ACCESSORY CABLE” for details.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Quest X - GX1500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Quest X - GX1500E in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info