603472

Standard Horizon QUANTUM - GX3500S Manual

28
Zoom out
Zoom in
Previous page
1/100
Next page
GX3500SPage 28
10.9 MAKING TELEPHONE CALLS
To make a radiotelephone call, use a channel designated for this purpose, The
fastest way to learn which channels are used for radiotelephone traffic is to ask
at a local marina. Channels available for such traffic are designated Public
Correspondence channels on the channel charts in this manual. Some ex-
amples for USA use are Channels 24, 25, 26, 27, 28, 84, 85, 86, and 87. Call
the marine operator and identify yourself by your vessel’s name, The marine
operator will then ask you how you will pay for the call (telephone credit card,
collect, etc.) and then link your radio transmission to the telephone lines.
The marine telephone company managing the VHF channel you are using may
charge a link-up fee in addition to the cost of the call.
10.10 OPERATING ON CHANNELS 13 AND 67
Channel 13 is used at docks and bridges and by vessels maneuvering in port.
Messages on this channel must concern navigation only, such as meeting and
passing in restricted waters.
Channel 67 is used for navigational traffic between vessels.
By regulation, power is normally limited to 1 Watt on these channels. Your radio
is programmed to automatically reduce power to this limit on these channels.
However, in certain situations it may be necessary to temporarily use a higher
power. See page 18 (
[
H/L
]
key) for means to temporarily override the low-power
limit on these two channels.
10.11 DUAL WATCH
(
TO PRIORITY CHANNEL
)
Dual watch allows the radio to monitor one channel and the assigned Priority
channel. By default the priority channel is set to 16, however the priority chan-
nel may be changed by referring to section “12.5 PRIORITY CHANNEL SET.”
1. Adjust the SQL knob until the background noise disappears.
2. Select the channel you wish to dual watch to “Priority channel.”
3. Press the
[
F
]
key followed by the
[
4
(
DW
)]
key.
The display will scan between Priority channel and
the channel that was selected in step 2.
If a transmission is received on the channel selected
in step 2, the GX3500S will dual watch between the
working channel and the Priority channel.
4. To stop Dual Watch, press the
[
CLR
]
key or press the
[
F
]
key followed by
the
[
4
(
DW
)]
key again.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon QUANTUM - GX3500S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon QUANTUM - GX3500S in the language / languages: English as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info