603475

Standard Horizon PHANTOM - PS2000 Manual

39
Zoom out
Zoom in
Previous page
1/84
Next page
Page 39Phantom PS2000
VH-310 HANDSET:
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“RADIO SETUP” menu appears.
2. Press the
[
]
key to select “DSC SETUP” menu,
then press the
[
ENT
]
key.
3. Press the
[
]
or
[
]
key to select “USER MMSI.”
4. Press the
[
ENT
]
key. The User MMSI number will
appear, and the first digit will be flashing.
5. Enter your MMSI (up to nine digits) from the key-
pad.
When the last number of your MMSI is in place, press
and hold the
[
ENT
]
key to store your MMSI.
7. To exit this menu and return to radio operation mode,
press the
[
16/9
]
key .
11.3 DSC DISTRESS CALL
The Phantom PS2000 is capable of transmitting and receiving DSC Distress
messages to all DSC radios. The Phantom PS2000 may be connected to a
GPS to also transmit the Latitude, Longitude of the vessel in a distress.
11.3.1 Transmitting a DSC Distress Call
NOTE
To be able to transmit a DSC distress call an MMSI number must be
programmed, refer to section “11.2.2 Programming the MMSI.”
In order for your ships location to be transmitted a GPS must be connected to
the Phantom PS2000, refer to section “8.4 CONNECTION OF GPS WITH
NMEA OUTPUT.”
1. Lift the red cover, then press the
[
DISTRESS
]
key. The “DIS-
TRESS
” notation will appear on the LCD.
2. Press and hold the
[
DISTRESS
]
key. The radios display will
count down (3-2-1) and then transmit the Distress call.
3. When the distress signal is sent, CH70 and “ ” icon will
appear on the LCD. After the message has been sent, the
radio will sound a Distress Alarm.
4. The transceiver will watch for a DSC acknowledgment trans-
mission on CH70 and also receive calls on CH16.
5. If an acknowledgement is received, select channel 16 and
advise your distress situation.
6. If no acknowledgment is received, the distress call is re-
peated in 4 minute intervals until a DSC acknowledgment is received.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon PHANTOM - PS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon PHANTOM - PS2000 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info