603475
24
Zoom out
Zoom in
Previous page
1/84
Next page
Phantom PS2000Page 24
[
2
(
MEM
)]
Key
When in radio mode, this key is used to directly select channel digit “2” in
a channel number.
Secondary use (Depends on the transceiver version)
Press the
[
F
]
key first then press the
[
2
(
MEM
)]
key, memorize the se-
lected channel into the transceiver scan memory for scanning. When
repeat the same procedures
([
F
]
[
2
(
MEM
)])
, DELETES the channel
from the scan memory. Refer to section “10.12 SCANNING” for details.
[
3
(
SCAN
)]
Key
When in radio mode, this key is used to directly select channel digit “3” in
a channel number.
Secondary use (Depends on the transceiver version)
Press the
[
F
]
key first then press the
[
3
(
SCAN
)]
key, start and stop the
scanning of programmed channels. Refer to section “10.12 SCANNING
for details.
[
4
(
DW
)]
Key
When in radio mode, this key is used to directly select channel digit “4” in
a channel number.
Secondary use (Depends on the transceiver version)
Press the
[
F
]
key first then press the
[
4
(
DW
)]
key, scan for voice commu-
nications on the priority channel and another selected channel until a
signal is received on either channel (Dual Watch). Refer to section “10.11
DUAL WATCH
(
TO PRIORITY CHANNEL
)
” for details.
[
5
(
IC
)]
Key
When in radio mode, this key is used to directly select channel digit “5” in
a channel number.
Secondary use
Press the
[
F
]
key then press the
[
5
(
IC
)]
key to activate intercom function
between RAM+(s) or VH-310 handset(s).
Refer to section “10.15 INTERCOM OPERATION” for details.
[
6
(
NAV
)]
Key
When in radio mode, this key is used to directly select channel digit “6” in
a channel number.
Secondary use
Press the
[
F
]
key first then press the
[
6
(
NAV
)]
key, the LCD displays NAV
GPS Data, Time, SOG (Speed Over Ground), and COG (Course Over
Ground) when a GPS is connected to the accessory cable of the PS2000.
See section “8.5 CONNECTION OF GPS WITH NMEA OUTPUT” for
details.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon PHANTOM - PS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon PHANTOM - PS2000 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info