603501

Standard Horizon MDS-10-5 Manual

29
Zoom out
Zoom in
Previous page
1/38
Next page
Radar Installation Manual Page 31
Appendix A. WHAT IS RADAR?
A.0 GENERAL
The word “radar” is an acronym for “RAdio Detecting And Ranging.” In very simple terms,
this is how it works. A radio transmitter sends a quick microwave pulse, and then a receiver
listens for that signal’s echo when it is bounced back from something in its path. The
returning signal is processed by a computer to determine its relative distance, position and
bearing. This information is graphically displayed on a screen for you to see. Other boats
or ships, navigational markers, landmasses and such are referred to as targets.
By knowing how long it takes for a signal to return, the distance to a target can be
determined. As the radar antenna scans through a 360-degree rotation, it can show where
the target is relative to your position. By repeated scans, you can see which direction
another vessel is moving.
Buoy
Other ship
Radar
Antenna
Radar
Figure A - Radar
A.0.0 Antenna
How radar will perform is largely determined by its antenna or scanner. Increasing the size
of the antenna improves long-range performance and target discrimination, or the ability to
distinguish two separate targets at a distance. The critical factors are the antenna’s beam
width and side lobe level. Typically, a radar antenna will radiate a tightly focused beam from
the front of the array. The longer the antenna array is, the narrower the beam width will be.
Additionally, it will also emit smaller amounts of energy to each side. The lower the side lobe
level, the less the effect of a false echo.
A.0.1 Side Lobe
The beam in which the strongest radio signal is radiated from the antenna is called the “main
lobe”. Those beams that are radiated in other directions are referred to as the “side lobes”.
The side lobe level refers to the difference in level (signal strength) between the largest side
lobe and the main lobe.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MDS-10-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MDS-10-5 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info