603464

Standard Horizon MATRIX AIS GX2100 Manual

73
Zoom out
Zoom in
Previous page
1/136
Next page
Page 73GX2000/GX2100
11.9.3 Receiving a DSC Position Report Call
When another vessel transmits their vessels location to the GX2000/GX2100
the following will happen:
1. A ringing sound will be produced when the call is received and NMEA
sentences DSC, DSE are outputted so the position
can be shown on a chart plotter or a computer.
2. Press the
[
CLR
(
WX
)]
key to stop ringing.
3. Rotate the CHANNEL knob to see position infor-
mation of the station.
4. To exit to radio mode, press the
[
QUIT
]
soft key.
11.9.4 Navigating to a Position Report
The GX2000/GX2100 has a feature that allows navigation to a received Posi-
tion Report call by using the Compass display. Navigating to the position of a
Position Report call may be enabled by the procedure below.
1. After the Position Report call has been re-
ceived: press the
[
TO WPT
]
soft key.
2. To start navigating using the compass display,
press and hold the
[
ENT
]
soft key until the
Compass Page is shown. The display indicates the
distance and direction of the received vessel, and
also the compass indicates the received vessel by
dot
(
)
.
Stop Navigating to a Position Report
To stop navigation and return to the radio mode:
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“Setup Menu” appears.
2. Rotate the CHANNEL knob to select “GENERAL
SETUP” menu.
3. Press the
[
SELECT
]
soft key, then select “DISPLAY”
with the CHANNEL knob.
4. Press the
[
SELECT
]
soft key.
5. Rotate the CHANNEL knob to select “NORMAL”.
6. Press the
[
ENT
]
soft key to return to radio opera-
tion.
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MATRIX AIS GX2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MATRIX AIS GX2100 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info