603464

Standard Horizon MATRIX AIS GX2100 Manual

69
Zoom out
Zoom in
Previous page
1/136
Next page
Page 69GX2000/GX2100
Manual Request
This feature allows you to request the position of vessel by manually entering
the MMSI of the ship you want to send your position to.
1. Press the
[
CALL
(
MENU
)]
key. The “DSC Menu” will appear.
2. Rotate the CHANNEL knob to select “POS REQUEST”.
3. Press the
[
SELECT
]
soft key to show the “Last
Individual Call”.
4. Rotate the CHANNEL knob to select the
“MANUAL,” then press the
[
SELECT
]
soft key.
5. Rotate the CH knob to select the first number
of the MMSI (nine digits) which you want to
contact, then press the
[
SELECT
]
soft key to
step to the next number.
6. Repeat step 5 to set the MMSI number.
7. If a mistake was made entering in the MMSI
number, repeat pressing the
[
BACK
]
soft key
until the wrong number is selected, then ro-
tate the CHANNEL knob to correct the entry.
8. When finished entering the MMSI number,
press and hold the
[
SELECT
]
soft key.
9. Press the
[
YES
]
soft key to transmit the position re-
quest DSC call.
10. When the GX2000/GX2100 receives the position
from the polled vessel it is shown on the radio dis-
play and also transferred to the GPS Chart plotter
with NMEA DSC and DSE sentences.
11. Press the
[
QUIT
]
soft key to return to radio opera-
tion.
11.8.4 Receiving a Position Request
When a position request call is received from another vessel, a ringing alarm
sounds and POS REQUEST will be shown in the display. Operation and trans-
ceiver function differs depending on “Position Reply” in the “DSC Setup” menu
setting discussed below:
Automatically reply:
1. When a position request call is received, a calling
alarm sounds 4 times. Then requested position co-
ordinates are transmitted automatically to the ves-
sel requesting your vessels position.
2. To exit from position request display, press the
[
QUIT
]
soft key.
… 69 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MATRIX AIS GX2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MATRIX AIS GX2100 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info