603464

Standard Horizon MATRIX AIS GX2100 Manual

65
Zoom out
Zoom in
Previous page
1/136
Next page
Page 65GX2000/GX2100
5. Press the
[
SELECT
]
soft key, then rotate the
CHANNEL knob to select the operating chan-
nel you want to communicate on, then press
the
[
SELECT
]
soft key. If the channel you want
is not shown, press the
[
MANUAL
]
soft key, then
rotate the CHANNEL knob to select the operating
channel you want to communicate on, then press
the
[
SELECT
]
soft key.
6. Press the
[
YES
]
soft key to transmit the Group Call
signal.
7. When the Group Call signal is sent, the dis-
play will be as shown in the illustration at the
right.
8. After the Group Call is transmitted, all the radios in
the group will switch to the designated channel.
9. Listen to the channel to make sure it is not busy,
then press the microphone’s PTT switch and call
the other vessel you desire to communicate with.
Manual Calling
This feature allows you to contact a group of vessels by entering in their Group
MMSI manually.
1. Press the
[
CALL
(
MENU
)]
key. The “DSC
Menu” will appear.
2. Rotate the CHANNEL knob to select
“GROUP”. (To cancel, press the
[
QUIT
]
soft
key.)
3. Press the
[
SELECT
]
soft key. The transceiver
will beep, and the “Last Group Call” will ap-
pear.
4. Select “MANUAL” with the CHANNEL knob.
5. Press the
[
SELECT
]
soft key.
6. Rotate the CHANNEL knob to select the first
number of the MMSI (nine digits: first digit per-
manently set to “0”) which you want to con-
tact, then press the
[
SELECT
]
soft key to step
to the next number.
7. Repeat step 6 to set the MMSI number.
8. If a mistake was made entering in the MMSI
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MATRIX AIS GX2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MATRIX AIS GX2100 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info