603464

Standard Horizon MATRIX AIS GX2100 Manual

58
Zoom out
Zoom in
Previous page
1/136
Next page
GX2000/GX2100Page 58
3. Press the
[
SELECT
]
soft key. The transceiver will
beep, and the “Last Individual Call” will appear.
4. Press the
[
NEW ID
]
soft key, then select “MANUAL”
with the CHANNEL knob.
5. Press the
[
SELECT
]
soft key.
6. Rotate the CHANNEL knob to select the first num-
ber of the MMSI which you want to contact, then
press the
[
SELECT
]
soft key to step to the next num-
ber.
7. Repeat step 6 to set the MMSI number (nine digits).
8. If a mistake was made entering in the MMSI num-
ber, repeat pressing the
[
BACK
]
key until the wrong
number is selected, then rotate the CHANNEL knob
to correct the entry.
9. When finished entering the MMSI number, press and
hold the
[
SELECT
]
soft key.
10. Press the
[
SELECT
]
soft key, then rotate the CHAN-
NEL knob to select the operating channel you want
to communicate on, then press the
[
SELECT
]
soft
key. If the channel is not shown in the list, press the
[
MANUAL
]
soft key, then rotate the CHANNEL knob
to select the operating channel you want to com-
municate on, then press the
[
SELECT
]
soft key.
11. Press the
[
YES
]
soft key to transmit the individual
DSC signal.
12. When an individual call acknowledgment is received,
the established channel is automatically changed
to the channel which is selected on step 5 above
and a ringing tone sounds.
13. Press the
[
QUIT
]
soft key to listen to the channel to
make sure it is not busy, then press the microphone’s
PTT switch and talk into the microphone to the other
vessel.
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MATRIX AIS GX2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MATRIX AIS GX2100 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info