603464

Standard Horizon MATRIX AIS GX2100 Manual

43
Zoom out
Zoom in
Previous page
1/136
Next page
Page 43GX2000/GX2100
10.12 INTERCOM OPERATION
To access the following Intercom functions one of the soft keys must be setup
as IC. Refer to section “12.12 SOFT KEYS”.
In addition an optional RAM3 must be connected to perform intercom func-
tions between the radio and the RAM3.
10.12.1 Communication
1. Press the one of the soft keys momentarily, then
press the
[
IC
]
soft key to enable the intercom mode.
Note: Depending on the programming of the
[
IC
]
soft key, the
[
NEXT
]
soft key may have to be pressed
to see the
[
IC
]
soft key.
2. When the intercom mode is enabled, “Intercom” is displayed on the radio
and CMP30
(
RAM3
)
Remote Station Microphone.
3. Press the PTT switch on the
radio. “Talk” will be shown on
the display.
Note: A warning beep will be
heard when the Radios PTT
and CMP30
(
RAM3
)
PTT are
pushed at the same time.
4. Speak slowly and clearly into
the microphone, hold the mi-
crophone about 1/2 inch away
from your mouth.
5. When finished, release the PTT switch.
6. Press the
[
CLR
(
WX
)]
key to exit intercom mode and revert to radio mode.
10.12.2 Calling
Press and holding the
[
IC
]
soft key when in intercom mode on either the radio
or CMP30
(
RAM3
)
mic will produce a calling beep to the other station.
(
CMP30’s PTT switch is pressed
)
GX2000/GX2100 CMP30
(
GX2000/GX2100’s PTT switch is pressed
)
GX2000/GX2100 CMP30
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MATRIX AIS GX2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MATRIX AIS GX2100 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info