603464

Standard Horizon MATRIX AIS GX2100 Manual

30
Zoom out
Zoom in
Previous page
1/136
Next page
GX2000/GX2100Page 30
Soft Keys
The 3 soft keys functions can be customized by the Setup Menu mode
section “12.12 SOFT KEYS”. When one of the soft keys is pressed briefly,
the functions will appear above each key on the display.
[
AIS
]
Key
Press the
[
AIS
]
key to display the AIS (Automatic Identification System)
targets information on the display. Refer to section “15.7 AIS OPERATION”
for details.
Note: For this key to operate on the GX2000 an optional AIS receiver or
transponder and GPS must be connected to show AIS targets on the ra-
dios display. On the GX2100 a GPS must be connected to the radio to
show AIS targets on the radios display.
[
CLR
(
WX
)]
Key
Press the
[
CLR
(
WX
)]
key briefly to cancel a selection the “Setup Menu”
and “DSC Menu”.
Press and hold the
[
CLR
(
WX
)]
key to recall the previously selected NOAA
weather channel from any channel. Press and hold the
[
CLR
(
WX
)]
key
again reverts to the previous selected working channel.
[
CALL
(
MENU
)]
Key
Press the
[
CALL
(
MENU
)]
key to access the “DSC MENU”.
SECONDARY USE
Press and hold the
[
CALL
(
MENU
)]
key to access the “SETUP MENU”.
[
H/L
]
Key
Press the
[
H/L
]
key to toggle between 25 W (High) and 1 W (Low) power.
When the TX output power is set to “Low” while the transceiver is on chan-
nel 13 or 67, the output power will temporarily switch from “Low” to “High”
power until the PTT is released. The
[
H/L
]
key does not function on trans-
mit inhibited and low power only channels.
SECONDARY USE
When the Normal (Radio display) is selected, push and hold this key to
show or hide SOG and COG on the display.
[
16/9
]
Key
Press the
[
16/9
]
key briefly to recall channel 16 from any channel location.
Press and hold the
[
CLR
(
WX
)]
key to recall channel 9. Pressing the
[
16/9
]
key again reverts to the previous selected working channel.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MATRIX AIS GX2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MATRIX AIS GX2100 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info