603464

Standard Horizon MATRIX AIS GX2100 Manual

27
Zoom out
Zoom in
Previous page
1/136
Next page
Page 27GX2000/GX2100
Connecting an External Speaker to the RAM3 Mic Cable
In noisy locations and optional external speaker may be connected to the white
speaker wires on the RAM3 routing cable. The RAM3 can drive the internal
speaker or the external speaker one at a time. When connecting an external
speaker, follow the procedure below to turn off the RAM3 audio and enable
the external speaker wires on the RAM3 routing cable.
1. On the RAM3 mic, press and hold the
[
CALL
(
MENU
)]
key until “Setup Menu” appears, then
select “GENERAL SETUP” with the
[
]
/
[
]
key.
2. Press the
[
ENT
]
key.
3. Press the
[
]
key to until “EXT SPEAKER” is shown
and press the
[
SELECT
]
soft key.
4. Press the
[
]
or
[
]
key to select “OFF” (External
speaker off) or “ON” (External speaker on).
5. Press the
[
ENT
]
soft key to save the selection.
6. Press the
[
16/9
]
key to exit this mode.
External Speaker AF Selection
The “AF Select” menu allows you to set the audio output level of the RAM3
external speaker wires (on routing cable) to a fixed level regardless of the
volume level setting of the RAM3 which is useful when using the optional MLS-
310 amplified speaker with on/off volume control.
1. On the RAM3 mic, press and hold the
[
CALL
(
MENU
)]
key until “Setup Menu” appears, then
select “GENERAL SETUP” with the
[
]
/
[
]
key.
2. Press the
[
ENT
]
key.
3. Press the
[
]
key to until “AF SELECT” is shown and
press the
[
SELECT
]
soft key.
4. Press the
[
]
or
[
]
key to select “PR” (External
Speaker Level is “Fixed”) or “PO” (External Speaker
Level is “Adjustable”).
“Fixed” use when MLS-310 is connected.
“Adjustable” use when MLS-300 or other speaker
without volume control is connected.
5. Press the
[
ENT
]
key to save the selection.
6. Press the
[
16/9
]
key to exit this mode.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MATRIX AIS GX2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MATRIX AIS GX2100 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info